Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Voce di capitolato

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Specifiche tecniche

Rif. Unicomeyersound-ashby
Famiglia di prodottoLoudspeakers
Gruppo di famigliaPoint Source
TipoOggetto (oggetto singolo)
Data di pubblicazione2020-03-12
Numero di versione2

Links

Link al Prodottohttps://meyersound.com/product/ashby/
Istruzioni di installazionehttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Certificazione di Prodottohttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Descrizione Tecnicahttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Relativo a

Materiale principaleAlluminio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectElementi elettronici - Elettronica Audio
Clasificazione IFCOggetto
Codice Uniclass 2015Pr_70_75_36_50
Descrizione Uniclass 2015Loudspeakers
Codice CSI MasterFormat 201427 24 23
Titolo CSI MasterFormat 2014Audio-Video Devices
Numero OmniClass23-37 15 29 11 13
Titolo OmniClassLoudspeakers

Disponibilità Regionale

Europa	Asia	Nord America	Africa	Sud America	Oceania
Albania	Afghanistan	Anguilla	Algeria	Argentina	Australia
Andorra	Arabia Saudita	Antigua e Barbuda	Angola	Bolivia	Figi
Austria	Armenia	Aruba	Benin	Brasile	Guam
Belgio	Azerbaijan	Bahamas	Botswana	Cile	Isola Norfolk
Bielorussia	Bahrein	Barbados	Burkina Faso	Colombia	Isole Cook
Bosnia ed Erzegovina	Bangladesh	Belize	Burundi	Ecuador	Isole Marianne Settentrionali
Bulgaria	Bhutan	Bermuda	Camerun	Guiana Francese	Isole Marshall
Cipro	Brunei	Canada	Capo Verde	Guyana	Isole Minori Esterne degli Stati Uniti
Città del Vaticano	Cambogia	Costa Rica	Ciad	Isole Falkland (Malvine)	Isole Pitcairn
Croazia	Cina	Cuba	Comore	Paraguay	Isole Salomone
Danimarca	Corea del Nord	Curaçao	Congo	Perù	Kiribati
Estonia	Corea del Sud	Dominica	Costa d'Avorio	Suriname	Nauru
Finlandia	Emirati Arabi Uniti	El Salvador	Egitto	Uruguay	Niue
Francia	Filippine	Giamaica	Eritrea	Venezuela	Nuova Caledonia
Germania	Georgia	Grenada	eSwatini		Nuova Zelanda
Gibilterra	Giappone	Groenlandia	Etiopia		Palau
Grecia	Giordania	Guadalupa	Gabon		Papua Nuova Guinea
Guernsey	Hong Kong	Guatemala	Gambia		Polinesia Francese
Irlanda	India	Haiti	Ghana		Samoa
Islanda	Indonesia	Honduras	Gibuti		Samoa Americane
Isola di Man	Isola di Natale	Isole BES	Guinea		Stati Federati di Micronesia
Isole Åland	Isole Cocos (Keeling)	Isole Cayman	Guinea Equatoriale		Timor Est
Isole Faroe	Israele	Isole Turks e Caicos	Guinea-Bissau		Tokelau
Italia	Kazakistan	Isole Vergini Americane	Kenya		Tonga
Jersey	Kirghizistan	Isole Vergini britanniche	Lesotho		Tuvalu
Lettonia	Kuwait	Martinica	Liberia		Vanuatu
Liechtenstein	Laos	Messico	Libia		Wallis e Futuna
Lituania	Libano	Montserrat	Madagascar
Lussemburgo	Macau	Nicaragua	Malawi
Macedonia del Nord	Maldive	Panamá	Mali
Malta	Malesia	Porto Rico	Marocco
Moldavia	Mongolia	Repubblica Dominicana	Mauritania
Monaco	Myanmar (Burma)	Saint Kitts e Nevis	Mauritius
Montenegro	Nepal	Saint Martin	Mayotte
Norvegia	Oman	Saint Vincent e Grenadine	Mozambico
Paesi Bassi	Pakistan	Saint-Barthélemy	Namibia
Polonia	Palestina	Saint-Pierre e Miquelon	Niger
Portogallo	Qatar	Santa Lucia	Nigeria
Regno Unito	Singapore	Sint Maarten	Repubblica Centrafricana
Repubblica Ceca	Siria	Stati Uniti	Repubblica Democratica del Congo
Romania	Sri Lanka	Trinidad e Tobago	Riunione
Russia	Tagikistan		Ruanda
San Marino	Tailandia		Sahara Occidentale
Serbia	Taiwan		Sant'Elena
Slovacchia	Territori Britannici dell'Oceano Indiano		São Tomé e Príncipe
Slovenia	Turchia		Senegal
Spagna	Turkmenistan		Seychelles
Svalbard e Jan Mayen	Uzbekistan		Sierra Leone
Svezia	Vietnam		Somalia
Svizzera	Yemen		Sudafrica
Ucraina			Sudan
Ungheria			Sudan del Sud
			Tanzania
			Togo
			Tunisia
			Uganda
			Zambia
			Zimbabwe

Prodotti simili

Crown Audio DCi 2|1250 Two-channel, 1250W @ 4Ω Analog Power Amplifier, 70V/100V

LOWELL Manufacturing Co ES-62T: 6.5" Coaxial Speaker w/Back Can (ES Series)

4.5 (6)

LOWELL Manufacturing Co ES-52T: 5-1/4" Coaxial Speaker (ES Series)

JBL Professional 5742 4-Way High Power ScreenArray Loudspeakers

Meyer Sound 4017 Shotgun Microphone

JBL Professional VP7215/64DP - Powered 15 in. 2-way Integrated Loudspeaker System

Ashby Ceiling Loudspeakers

Prodotti simili

Per Aziende produttrici

Riguardo a

Legale