Low Profile Parallel Fan Powered Terminal with Hot Water Reheat on Discharge - FVL-600

The Metalaire model FVL-600 parallel fan-powered terminal unit is designed to provide superior comfort to zones by intermittent parallel fan operation. Conditioned primary air is varied during cooling while the fan cycles on during heating. The primary air does not pass through the fan. The model FVL-600 is designed with a reduced height for low clearance ceiling applications.

Capacities ranging from 200-2,500 CFM in 3 casing sizes
Reduced height for low clearance applications
AHRI Certified, ETL listed, UL 1995, Complies with NFPA 90A and UL 181
Pneumatic, Electric, Analog, or Direct Digital Controls available

Voce di capitolato

- Single speed high efficiency PSC motor with SCR motor speed control
- Field adjustable baffles, top and bottom, for balancing
- Large bottom access panel provided for easy motor/blower servicing
- Gasketed back draft damper to minimize leakage in cooling mode
- Industry leading continuous welded primary inlet duct to minimize leakage with three stiffening beads for added rigidity
- All metal constructed inlet flow sensor with extra balancing taps
- NEMA 1 rated control enclosure with stand-off to prevent penetration of casing
- Full range of options and accessories available including liners, heating coils, access doors, attenuators, etc.
- All FVL-600 terminal units are AHRI certified and shipped with the AHRI seal
Liners
- ½” 1.5lbs fiberglass
- ¾”, or 1” 1.5lbs foil faced
- ½” or 1” Thermopure closed cell foam
Access Doors
- Damper
- Motor/Blower
- Inlet sensor
- Hot water coil
- Electric heat
Other options available:
- 5 different control enclosures
- 4 different handing configurations
- 3 different outlet connections
- Hanger brackets
- 4 different transformers
- Multiple how water coil options
- Multiple electric heat options
- Custom options

Specifiche tecniche

Rif. UnicoLow-Profile-Parallel-Fan-Powered-Terminal-Hot-Water-Discharge-FVL-600
Famiglia di prodottoAir Terminal Units
Gruppo di famigliaFan Powered Air Terminal Units - Variable Volume
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-04-09
Numero di versione1

Links

Link al Prodottohttps://www.metalaire.com/product/model-fvl-600
Istruzioni di installazionehttps://www.metalaire.com/doc/fan-powered-air-terminal-units-variable-volume-installation-15693.pdf
Descrizione Tecnicahttps://www.metalaire.com/doc/model-fvl-600-submittals-76.pdf

Relativo a

Materiale principaleAcciaio
Materiale secondarioAlluminio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Ventilazione meccanica
Clasificazione IFCBocchettone
Nome UNSPSCAir diffusers
Codice UNSPSC40101505
Codice Uniclass 2015Pr_70_65_04_02
Descrizione Uniclass 2015Air diffusers
Codice CSI MasterFormat 201423 37 13
Titolo CSI MasterFormat 2014Diffusers, Registers, and Grilles
Numero OmniClass23-33 49 11 11
Titolo OmniClassCeiling Ventilation Diffusers
Codice CSI UniFormat IID30
Titolo CSI UniFormat IIHVAC