Haws 2000HSA.8 RIVIVE Hydration Station Chilled Recessed Bottle Filler with Mounting Frame, Refrigerated

The model 2000HSA.8 vandal-resistant, Architectural, chilled, motion-activated bottle filling station is a touch-free, hygienic, water dispenser with architectural appeal that allows users to enjoy the benefits of fresh, filtered water with none of the drawbacks of bottled water. Recessed, in-wall-mounted design allows the bottle filling station to be placed securely in multiple locations without taking up excess space, and is practical for permanent, high-traffic applications such as schools, office buildings, fitness centers, and manufacturing facilities.

Tested and certified by CSA against NSF/ANSI/CAN 61, Section 9, NSF/ANSI/CAN 372, CSA Standard B483.1 and California Health and Safety Code 116875 (AB 1953-2006)
All stainless-steel front panels and bottle filler alcove
Sensor features a 20-second timeout function which prevents unwanted use
Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
State-of-the-art integral water filtration system assures fresh, filtered water
3000 gallon (11356 L) capacity, with filter replacement indicator light to notify when replacement is necessary, model 6428
Smart energy savings feature powers down refrigeration system after 2 hours of non-use and will automatically start again when used
Front access for changing smart filter which incorporates easy set, change and monitor reset programming
Laminar flow prevents splashing, keeping the drinking area contained and clean
Large LED lit 12" bottle opening with quick 1.1 gpm fill rate, and bottle counter showing number of bottles saved
Field-configurable as either filtered or non-filtered
Intended for indoor use only

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Voce di capitolato

Model 2000HSA.8 RIVIVE™ Hydration Station™ motion-activated bottle filling station with architectural roots is recessed wall-mount wheel chair accessible, constructed of heavy duty, Type 304 Stainless Steel with a satin finish, and stainless steel satin finish back panel and louvered intrusion-proof grill. Bottle filler includes a 3000 gallon (11356 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light, LED lighted 12" sensor operated bottle opening with quick 1.1 gpm fill rate and laminar flow with front access for changing filter, smart energy savings feature powers down refrigeration system after 2 hours of non-use, auto purge feature automatically cycles water once every 24 hours, display menu which shows sensor range adjustment, factory reset, software/firmware version readout and error readout, along with bottle counter showing number of bottles saved, and vandal-resistant sensor resists scratching and water droplet fowling. The mounting frame is of heavy gauge, galvanized steel. Provides enough access room for water stop, electrical junction box, filter and drain connections. Field-configurable as either filtered or non-filtered. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5

Specifiche tecniche