Pubblica i tuoi prodotti
DIVERTRON
DIVERTRON
Dab Pumps

DIVERTRON

Divertron by DAB is a submersible electronic multi-impeller pump for clean water designed to increase water pressure, rainwater reuse, gardening and irrigation in residential building service. Divertron is ideal for the use in rainwater recovery systems and to increase water pressure from a cistern or a tank, that can be used for example for garden watering or vegetable garden. Divertron integrates a pressure switch, a flow sensor and the control electronics for automatic on and off switch. The automatic operation allows the pump to start and stop autonomously according to the requirements of the system and protects it from the run dry. The pump is supplied with integrated start capacitor (it is inside a compartment accessible without disassembling the pump), a non-return valve and a 15-meter power cable with plug. The pump is available with technopolymer anti-debris filter or with connection for float suction kit (X version).

Voce di capitolato
  • Flow rate: from1 m3/h to 5,4 m3/h

    Head up to: 45 m (900 version), 30 m (650 version)

    Maximum immersion depth:12 m

    Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral

    Liquid temperature range: From 0°C to +35°C

    Maximum immersion depth: 15 m

    Flanges, thread: 1" (supplied as standard with a four-section fitting-reducer)

    Pump maximum diameter:160 mm

    Impeller/s material: Technopolymer

    Maximum number of starts: 20/h

    Protection class: IP 68

    Motor insulation class: F

    Single phase power input: 230 V 50 Hz

    Power cable (m) and plug: 15 m H07RNF with power plug

    Possible type of installation: Fixed or movable in vertical position

    Special versions on request:Cable of different light, different type of power plug

Specifiche tecniche
  • Rif. Unicodivertron
  • Famiglia di prodottoSubmersible Pumps
  • Gruppo di famigliaSubmersible Monobloc Multistage Pumps 5''
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2023-01-17
  • Numero di versione1
Classificazioni
  • Categoria BIMobjectImpianto idraulico - Pompe
  • Clasificazione IFCRaccordo tubo
  • Codice ETIMEC010733
  • Nome ETIMSubmersible wastewater pump
  • Nome UNSPSCSubmersible pumps
  • Codice UNSPSC40151513
  • Codice Uniclass 2015Pr_65_53_24_86
  • Descrizione Uniclass 2015Submersible pumps
  • Codice CSI MasterFormat 201422 13 29.16
  • Titolo CSI MasterFormat 2014Submersible Sewerage Pumps
  • Numero OmniClass23-27 17 00
  • Titolo OmniClassPumps
  • Codice CSI UniFormat IID2090
  • Titolo CSI UniFormat IIOther Plumbing Systems

Disponibilità Regionale

Europa
Albania
Andorra
Austria
Belgio
Bielorussia
Bosnia ed Erzegovina
Bulgaria
Cipro
Città del Vaticano
Croazia
Danimarca
Estonia
Finlandia
Francia
Germania
Gibilterra
Grecia
Guernsey
Irlanda
Islanda
Isola di Man
Isole Åland
Isole Faroe
Italia
Jersey
Lettonia
Liechtenstein
Lituania
Lussemburgo
Macedonia del Nord
Malta
Moldavia
Monaco
Montenegro
Norvegia
Paesi Bassi
Polonia
Portogallo
Regno Unito
Repubblica Ceca
Romania
Russia
San Marino
Serbia
Slovacchia
Slovenia
Spagna
Svalbard e Jan Mayen
Svezia
Svizzera
Ucraina
Ungheria

Prodotti simili

4.2 su 5 stelle 4.2 (30)
4.4 su 5 stelle 4.4 (18)
4.0 su 5 stelle 4.0 (17)
4.7 su 5 stelle 4.7 (6)
4.9 su 5 stelle 4.9 (22)