Pubblica i tuoi prodotti
Brivo ACS300 Ethernet/Wi-Fi Controller
Brivo ACS300 Ethernet/Wi-Fi Controller
    Brivo

    Brivo ACS300 Ethernet/Wi-Fi Controller

    The Brivo ACS300 is our next generation of Ethernet/Wi-Fi controller designed to support components of Brivo Access control platforms.

    Building blocks for Brivo cloud-based security

    Brivo’s controllers are the supporting components of your Brivo access control platform. The ACS300-E is used for Brivo Access accounts.

    KEY FEATURES:

    • Supports:
      • Brivo Smart Readers as well as OSDP and Weigand readers
      • Up to 2 card readers per control panel
      • Brivo Mobile Pass
      • Select Brivo wireless lock integrations
    • Host communication via ethernet or WiFi
    • Host authentication via digital certificates
    • IP-based access control and alarms
    • Power over Ethernet (PoE+)
    • Encrypted storage and communications
    Voce di capitolato
    • Total number of credentials Unlimited credentials per ACS300-E controller when connected to Brivo Access. Up to 250,000 credentials per controller while offline.
      Maximum number of card readers 2
      Event history 60,000 events (FIFO) offline from host
      Input points 8 inputs per controller
      On board; (2) door position inputs; (2) Request to exit inputs; (4) Auxiliary inputs
      Output relays 6 outputs per controller
      (2) non-latching wet (12V, 350mA) or dry (6A @ 28VDC) selectable door lock relays, plus (4) general purpose dry relays (6A @ 28VDC)
      Max power consumption 12VDC @ 2.5A peak with all outputs at maximum allowed current limits.
      Card reader inputs (2) Wiegand Ports
      or
      (1) RS-485 Port for (2) OSDP Readers
      Temperature and humidity range Operating temperature: 32ºF to 125ºF, (0ºC to 49ºC) Humidity; Max 85% non-condensing
      Included components (2) MOV surge suppressors
      Input Power Recommended: Power over Ethernet (PoE+) from network switch or PoE+ injector
      Alternate: 12VDC, 2.5A - power supply (not included)
      Output Reader Power The controller can also supply power to the card reader devices:
      Each Wiegand Card Reader Port can supply 350mA @ 12VDC
      RS-485 Port can supply a total of 350mA @12VDC
      Enclosure dimensions 7.4”W x 7.5”H x 1.5”D (187mm x 190mm x 40mm)
      Host communications Ethernet 10/100Mbps or WiFi IEEE 802.11 b/g/n (2.4GHz)
    Specifiche tecniche
    • Rif. Unicobrivo-acs300-ethernet_wi-fi-controller
    • Famiglia di prodottoDevices
    • Gruppo di famigliaControl Panels
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2023-08-14
    • Numero di versione1
    Relativo a
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    Classificazioni
    • Categoria BIMobjectElementi elettronici - Controls
    • Clasificazione IFCComando
    • Codice Uniclass 2015Pr_75_75_27
    • Descrizione Uniclass 2015Electronic access control products
    • Codice CSI MasterFormat 201408 74 00
    • Titolo CSI MasterFormat 2014Access Control Hardware
    • Numero OmniClass23-29 13 00
    • Titolo OmniClassSecurity Access Controls

    Disponibilità Regionale

    Nord America
    Anguilla
    Antigua e Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Costa Rica
    Cuba
    Curaçao
    Dominica
    El Salvador
    Giamaica
    Grenada
    Groenlandia
    Guadalupa
    Guatemala
    Haiti
    Honduras
    Isole BES
    Isole Cayman
    Isole Turks e Caicos
    Isole Vergini Americane
    Isole Vergini britanniche
    Martinica
    Messico
    Montserrat
    Nicaragua
    Panamá
    Porto Rico
    Repubblica Dominicana
    Saint Kitts e Nevis
    Saint Martin
    Saint Vincent e Grenadine
    Saint-Barthélemy
    Saint-Pierre e Miquelon
    Santa Lucia
    Sint Maarten
    Stati Uniti
    Trinidad e Tobago