Pubblica i tuoi prodotti
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
Protan Protected (ballasted) warm roof system on concrete substrate
    PROTAN

    Protan Protected (ballasted) warm roof system on concrete substrate

    PROTAN PROTECTED WARM ROOF SYSTEM ON CONCRETE SUBSTRATE

    The roof is built up on the load-bearing structure with the vapour control layer at the bottom, followed by insulation, Protan membrane and then the ballast on top. The ballast is often pebbles,paving slabs or intensive green roofs. The fall requirements for the construction can be incorporated into the deck substrate or the insulation under the membrane.

    A ballasted roof with paving slabs is suitable for situations where foot traffic is expected, such as terraced areas for recreational use or frequent service access. Such roofs are used for both heavy load-bearing structures made of concrete and light load-bearing structures made of sheet steel. The composition principle is the same for both solutions. The heavy structure may be most suited to premises with a high moisture content, for example, while the light structure may be most suited to warehouses and the like. Pebbles may be used as ballast where the foot traffic is limited to minimal maintenance and inspection access only.

    For roof structures that are exposed to extra heavy loads, Protan GG Membrane is recommended.

    .CONSTRUCTION STRUCTURE:

    • PROTECTED WITH GRAVEL- /INVERTED- /INTENSIVE GREEN ROOFS
    • PROTAN G / GG MEMBRANE
    • INSULATION
    • VAPOUR CONTROL LAYER
    • CONCRETE SUBSTRATE

    PROTAN G / GGMEMBRANE

    • Protan G membrane is a glass fibre reinforced, microbe durable PVC membrane for gravel ballasted roofs, inverted roofs, and green roofs. 
    • Protan G membrane can withstand high and low temperatures and attack by micro-organisms. 
    • The membrane is dimensionally stable, which is important in load-bearing applications, inverted roofs, and green roofs. 
    • Protan G membrane can withstand high and low temperatures and attack by micro-organisms.
    • The membrane is welded together using hot air.

    SYSTEM INSTALLATION METHOD:

    • Protan G membrane is installed as a loose layer without fasteners securing it to the substrate. Protection layers are required where there is a risk of damage by the layers installed over the membrane.

    INSULATION:

    Various types of insulation can be used in combination with Protan membranes and can be flat insulation or sloped insulation. The material type and design will depend on the building design, fire classification and local regulation requirements. The compression strength of the insulation must be considered and chosen to according to the roof application.

    • Mineral wool (MW) – can be glass or stone type
    • Expanded polystyrene (EPS) - a glass separation layer / migration barrier must be used
    • Polyisocyanurate (PIR) - foil faced
    • Combination EPS-MW

    VAPOUR CONTROL LAYER:

    • Polyethylene
    • Bitumen

    CONCRETE SUBSTRATE:

    • Structural concrete as either precast elements or reinforced cast in-situ.


    Voce di capitolato
    • TECHNICAL SPECIFICATION

      Protan G specifications are subject to availability and may not be available or approved in all countries/regions.

      Membrane thickness:

      • 1.5 mm

      Membrane standard widths: 

      • 2.0 m 

      Membrane standard roll lengths: 

      • 7.5 m 
      • 15

      Membrane colours (nearest RAL code):

      • Dark grey F94 - RAL 7012 
      • Light grey F91- RAL 7040

      FIRE CLASSIFICATION

      Protan G has no fire classification.



    Specifiche tecniche
    • Rif. Unicoprotected_concrete_eu
    • Famiglia di prodottoRoofing
    • Gruppo di famigliaSingle Ply Membrane
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2019-02-19
    • Numero di versione1
    Relativo a
    • Materiale principalePVC
    • Materiale secondarioIsolamento
    • Progettato inNorvegia
    • Prodotto inNorvegia
    Classificazioni
    • Categoria BIMobjectMateriali da costruzione - Impermeabilizzante
    • Clasificazione IFCTetto
    • Nome UNSPSCRoofing membranes
    • Codice UNSPSC30151505
    • Codice Uniclass 2015Ss_30_40_30_80
    • Descrizione Uniclass 2015Single layer sheet warm roof covering systems
    • Codice CSI MasterFormat 201407 50 00
    • Titolo CSI MasterFormat 2014Membrane Roofing
    • Numero OmniClass23-13 39 31 11 27
    • Titolo OmniClassPolyvinyl chloride (PVC) Single Layer Roof Membranes
    • Codice CSI UniFormat IIB3010
    • Titolo CSI UniFormat IIRoof Coverings

    Disponibilità Regionale

    Europa Asia
    Albania
    Turchia
    Andorra
    Austria
    Belgio
    Bielorussia
    Bosnia ed Erzegovina
    Bulgaria
    Cipro
    Città del Vaticano
    Croazia
    Danimarca
    Estonia
    Finlandia
    Francia
    Germania
    Gibilterra
    Grecia
    Guernsey
    Irlanda
    Islanda
    Isola di Man
    Isole Åland
    Isole Faroe
    Italia
    Jersey
    Lettonia
    Liechtenstein
    Lituania
    Lussemburgo
    Macedonia del Nord
    Malta
    Moldavia
    Monaco
    Montenegro
    Norvegia
    Paesi Bassi
    Polonia
    Portogallo
    Regno Unito
    Repubblica Ceca
    Romania
    Russia
    San Marino
    Serbia
    Slovacchia
    Slovenia
    Spagna
    Svalbard e Jan Mayen
    Svezia
    Svizzera
    Ucraina
    Ungheria