Pubblica i tuoi prodotti
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System

    NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System

    For precise, non-parametric 'static' Revit and IFC models, please check the 3D configurator under 'Links - Tendering Information'.

    The SL60 is a thermally broken aluminum folding panel system designed to provide an opening glass wall or storefront for openings up to 39' (12 mm) wide. It is available in various configurations utilizing one to twelve panels. Units can be either be inward-opening or outward-opening. It exists with a swing entry/exit panel(s); note the further panel size constraints with a swing panel not hinged to a side jamb. 

    This system is appropriate in residential and commercial applications where high level of resistance to air and water infiltration is desired. The SL60 is Florida statewide approved with Product Approval number FL37263. Also, the SL 60/o system is the top-hung system while the SL 60/u system is the floor-mounted system. 

    Voce di capitolato
    • The maximum size limits shown are based on the weight of a panel that has a net glass thickness of not more than 10 mm (3/8”). For larger net glass thickness, this maximum size limit chart will not apply.

      For configurations with no swing panels, the minimum panel width needed is 2'1" (625 mm).

      For single glazing, a horizontal mullion is needed for all heights above 8'10" (2700 mm).

      For cornerless units, a horizontal mullion is needed for all heights above 8'4" (2550 mm). 

    Specifiche tecniche
    • Rif. Uniconst45934
    • Famiglia di prodottoDoors
    • Gruppo di famigliaFolding Doors and Grilles
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2011-11-16
    • Numero di versione1
    Relativo a
    • Materiale principaleAlluminio
    • Materiale secondarioVetro
    Classificazioni
    • Categoria BIMobjectPorte - Porte pieghevoli
    • Clasificazione IFCPannello porta
    • Nome UNSPSCDoors
    • Codice UNSPSC301715
    • Codice Uniclass 2015Ss_25_30_20_78
    • Descrizione Uniclass 2015Sliding folding doorset systems
    • Codice CSI MasterFormat 201408 35 13
    • Titolo CSI MasterFormat 2014Folding Doors
    • Numero OmniClass23-17 11 23 15
    • Titolo OmniClassFolding All Glass Doors and Grilles
    • Codice CSI UniFormat IIB2030
    • Titolo CSI UniFormat IIExterior Doors

    Disponibilità Regionale

    Nord America
    Anguilla
    Antigua e Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Costa Rica
    Cuba
    Curaçao
    Dominica
    El Salvador
    Giamaica
    Grenada
    Groenlandia
    Guadalupa
    Guatemala
    Haiti
    Honduras
    Isole BES
    Isole Cayman
    Isole Turks e Caicos
    Isole Vergini Americane
    Isole Vergini britanniche
    Martinica
    Messico
    Montserrat
    Nicaragua
    Panamá
    Porto Rico
    Repubblica Dominicana
    Saint Kitts e Nevis
    Saint Martin
    Saint Vincent e Grenadine
    Saint-Barthélemy
    Saint-Pierre e Miquelon
    Santa Lucia
    Sint Maarten
    Stati Uniti
    Trinidad e Tobago