SLR-16-3 Standing Seam Roof Panel System

With a wide selection of design options and superior strength capabilities, the SLR Series provides versatile architectural solutions for any project. SLR panels are standing seam roofing panels that can transition to wall. The 2" high seam may be mechanically seamed at 90 or 180 degrees at slopes as low as 1/2: 12 for the latter. Onsite roll-forming is available. Contact Morin for custom design options and capabilities for SLR.

Product Highlights

Onsite roll-forming of panels in continuous lengths is available to eliminate panel end laps
Watertight seam from eave to ridge for slopes as low as 1/2: 12 (for 180 degree seam)
Design option to transition from wall to roof
Curving capability down to 20' radius
Clip relief design to allow thermal expansion and contraction
Available in aluminum, galvalume, stainless steel, zinc, and copper
Standard and custom finish options available
ASTM, UL and FM approvals

Voce di capitolato

Panel Attachment
Standing seam concealed sliding or fixed clip, mechanically seamed
Panel Dimensions
Width: 16" nominal
Depth: 2" nominal
Standard Lengths: 5'-40' (shorter and longer lengths available)
Color and Finish Options
Full range of Morin standard colors as well as custom color options are available. Finish on one side or both sides.
Environmental
LEED Certified and EPD available for all products. View the EPD and LEED letter on our Certifications page.

Specifiche tecniche

Rif. Unicoslr-16-3-roof-panel-system
Famiglia di prodottoRoof Systems
Gruppo di famigliaSLR Series
TipoOggetto (oggetto singolo)
Data di pubblicazione2023-09-07
Numero di versione1

Links

Link al Prodottohttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-16-3/
Istruzioni di installazionehttps://www.morincorp.com/content/dam/morin/products/slr/slr-installation-guide.pdf
Certificazione di Prodottohttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-16-3/?s=d
Descrizione Tecnicahttps://www.morincorp.com/content/dam/morin/products/slr/morin-slr-slr-16-3-cr-r113-productdatasheet.pdf

Relativo a

Materiale principaleMetallo
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectEdilizia - Coperture, tetti e tegole
Clasificazione IFCTetto
Codice ETIMEG019610
Nome ETIMRoofing materials
Codice Uniclass 2015Pr_25_71_14
Descrizione Uniclass 2015Cladding and lining panels (Lightweight cladding and roofing panels)
Codice CSI MasterFormat 201407 41 13
Titolo CSI MasterFormat 2014Metal Roof Panels
Numero OmniClass23-13 39 11 11
Titolo OmniClassExterior Metal Roof Panels