Control 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

Surface-Mount Subwoofer for Subwoofer-Satellite
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

FEATURES

Full bandwidth 32 Hz – 20 kHz high fidelity sound
Selectable 70V/100V for distributed lines, or low impedance
Versatility for either two or four satellite speakers per system
Available in black or white

Keywords: Harman

Voce di capitolato

SPECIFICATIONS
Frequency Range (-10 dB) 32 Hz – 200 Hz
Frequency Response (±3 dB) 50 Hz – 150 Hz
Power Capacity 300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
(2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance 8 ohms (in bypass/thru mode)
Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight 9.0 kg (20 lbs)
Shipping Weight 10.2 kg (23 lbs)
Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

Specifiche tecniche

Rif. UnicoControl-50S-T-Surface-Mount-Subwoofer-for-Satellite-Loudspeaker-System
Famiglia di prodottoInstalled Sound
Gruppo di famigliaSurface Mount Speakers
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-06-22
Numero di versione1

Links

Link al Prodottohttp://www.jblpro.com/www/products/installed-sound/control-50-series/control-50s-t#.XC4hgVxKiUl
Istruzioni di installazionehttp://www.jblpro.com/ProductAttachments/C50ST_Installation_Guide.pdf
Descrizione Tecnicahttp://www.jblpro.com/ProductAttachments/Control50_SpecSheet.pdf

Relativo a

Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectElementi elettronici - Elettronica Audio
Clasificazione IFCOggetto
Codice ETIMEC000682
Nome ETIMLoudspeaker set
Nome UNSPSCAudio and visual presentation and composing equipment
Codice UNSPSC4511
Codice Uniclass 2015Pr_70_75_36_50
Descrizione Uniclass 2015Loudspeakers
Codice CSI MasterFormat 201411 52 00
Titolo CSI MasterFormat 2014Audio-Visual Equipment
Numero OmniClass23-37 15 29 11 13
Titolo OmniClassLoudspeakers

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago