Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Voce di capitolato

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Specifiche tecniche

Rif. Unicogeofor
Famiglia di prodottoBed Joint Reinforcement
Gruppo di famigliaGeofor
TipoOggetto (oggetto singolo)
Data di pubblicazione2017-05-08
Numero di versione1

Links

Link al Prodottohttp://www.geohidrol.com/?products=geofor%C2%AE

Relativo a

Materiale principaleAcciaio
Progettato inSpagna
Prodotto inSpagna

Classificazioni

Categoria BIMobjectMateriali da costruzione - Rinforzo
Clasificazione IFCRete d’armatura
Nome UNSPSCBricks
Codice UNSPSC301316
Codice Uniclass 2015Ss_25_13_50
Descrizione Uniclass 2015Masonry wall systems
Codice CSI MasterFormat 201404 05 19.26
Titolo CSI MasterFormat 2014Masonry Reinforcing Bars
Numero OmniClass23-13 21 21 11
Titolo OmniClassMasonry Reinforcing
Codice CSI UniFormat IIB2010
Titolo CSI UniFormat IIExterior Walls

Disponibilità Regionale

Europa
Albania
Andorra
Austria
Belgio
Bielorussia
Bosnia ed Erzegovina
Bulgaria
Cipro
Città del Vaticano
Croazia
Danimarca
Estonia
Finlandia
Francia
Germania
Gibilterra
Grecia
Guernsey
Irlanda
Islanda
Isola di Man
Isole Åland
Isole Faroe
Italia
Jersey
Lettonia
Liechtenstein
Lituania
Lussemburgo
Macedonia del Nord
Malta
Moldavia
Monaco
Montenegro
Norvegia
Paesi Bassi
Polonia
Portogallo
Regno Unito
Repubblica Ceca
Romania
Russia
San Marino
Serbia
Slovacchia
Slovenia
Spagna
Svalbard e Jan Mayen
Svezia
Svizzera
Ucraina
Ungheria