Termékek közzététele
High Intensity Infrared Heater, Model M

High Intensity Infrared Heater, Model M

The high-intensity heater Series M has a high-quality stainless steel combustion chamber and modern injector burner, which ensures clean combustion. The M heaters are a cost-effective alternative to our KMI series with a compact and easily mounted reflector hood.

  • 60 years of improving technology from GoGaS featuring their signature bright radiators for increased efficiency
  • Construction of Series M allows for increased flexibility leading to exceeding of expectations in various situations
  • Movable reflectors to allow heat radiators to be used in many applications
    High-quality stainless steel combustion chamber
    Combustion chamber includes modern injection burners which allow combustion to be practically free of hazardous matter and a wide power range from 21, 00 BTU/hr to 125,000 BTU/hr
    Easily mounted reflector with high reflection properties
    Radiation hood not insulated - compact, easy to install, maintenance-friendly
    Controlled preheating mixture to increase the degree of efficiency of the temperature of the gas/air mixture
Specifikáció
  • Assemblies shall be CSA approved high-intensity heaters to ANS1 Z83.19 (latest revision) and CSA 2.35 (latest revision). Approval shall include components of the complete heater, including burners, reflectors, accessories, thermostats, and associated controls and specifications. Installations of units shall comply with local building codes, or in their absence, the latest edition of the national regulations and procedures listed below. Heaters shall be electrically grounded in accordance with the National Electric Code, ANSI/NFPA 70 in the US, and the Canadian Electric Code, CSA C22.1 in Canada, and shall comply with all local requirements. Heaters shall be installed only for use with the type of gas appearing on the rating plate, and the installation shall conform to the National Fuel Gas Code, ANSI Z223.1 (NFPA 54) in the US and the Natural Gas and Propane Installation Codes, CAN/CGA B 149.1 & B149.2 in Canada. The Manufacturer warrants to the original owner that the product will be free of defects in material and workmanship. For the M Series, the warranty for all components except for the ceramic burner head assembly is limited to 24 months from the date of installation. The ceramic burner head assembly shall be warranted for an additional 8 years for units that are proven to the satisfaction of the manufacturer to be inoperative due to defects in material or workmanship.

    Basis-of-Design Product shall be Superior Radiant Products Model M Series high-intensity type gas-fired radiant infrared heaters with firing rates as called for within the range of 21 MBH to 125 MBH. CSA approved complete with single body burner head, ignition control, valve & gas pressure switch. Heaters must provide a radiant factor of at least 77.3% as tested to EN 419-2 standard and provide documentation upon request and shall cover the entire infrared spectrum – from short to long wavelengths at a minimum gas inlet pressure of 6.5 inches W.C. (natural gas) and 12 inches W.C. (propane). Maximum inlet pressure for both fuel types is 14 inches W.C. The unit shall draw no more than 20 VA at either 24 VAC or 120VAC, 60Hz. The heater shall perform controlled and clean surface combustion. The resulting quantity of noxious components CO and NOx shall be CO:  20 – 200 ppm; NOx: 4 – 10 ppm. Heater body shall be comprised of Burner-head (mixing chamber, ceramic emitter tiles, and steel mesh), outer body, and reflector assemblies. Burner head shall be stainless steel venturi and shall provide for pre-heat of the air-fuel mixture to achieve higher efficiency. Ignition shall be a solid-state direct spark and make a minimum of 3 ignition attempts before the lockout. Ignition shall have openly accessible sense current contacts. The gas valve shall include a manual valve, two magnetic operators, and a standard gas pressure regulator and have pressure taps to measure inlet and manifold pressures. Controls shall incorporate a gas pressure switch capable of shutting off power to the ignition module in case of inlet gas pressure drops below the minimum requirement.

    This product was specified based on best practice design to meet the specific engineered design criteria for this project.  

    Any submission for substitution must include the following material for consideration or bid will be deemed unqualified and rejected:

    • Independent lab testing to EN416-2 standard dated no later than 6 months from date of submission showing a minimum 77% radiant factor.
    • Professional Engineer Stamped Design, calculations, and complete set of stamped drawings with the new system.
    • Stamped fuel usage data showing a minimum 20% fuel savings over specified Superior Radiant Model 
    • Verification that Manufacturer successfully completed and passed the auditing requirements for ISO 9001 Quality Management System (QMS).

Műszaki specifikáció
  • Egyedi azonosítóm
  • TermékcsaládHigh Intensity Heaters
  • TermékcsoportMid Efficiency - Series M
  • TípusObjektum (egy termék)
  • Megjelenés dátuma2021-02-16
  • Verziószám1
Kapcsolódó adatok
  • Elsődleges anyagAlumínium
  • Másodlagos anyagKerámia
  • Tervezés helyeKanada
  • Gyártás helyeKanada
Besorolások
  • BIMobject kategóriaHVAC - Fűtőtestek
  • IFC besorolásTérfűtő
  • UNSPSC névSpace heaters
  • UNSPSC kód40101819
  • Uniclass 2015 kódPr_70_60_36_70
  • Uniclass 2015 leírásRadiant luminous heaters
  • CSI MasterFormat 2014 kód23 55 23
  • CSI MasterFormat 2014 névGas-Fired Radiant Heaters
  • OmniClass szám23-33 15 17 13
  • OmniClass névFuel Fired HVAC Radiant Heaters
  • CSI UniFormat II kódD3090
  • CSI Uniformat II névOther HVAC Systems & Equipment

Termék elérhetősége

Európa Észak-Amerika Ázsia
Åland
Anguilla
Azerbajdzsán
Albania
Antigua és Barbuda
Banglades
Andorra
Aruba
Bhután
Ausztria
Bahama-szigetek
Brit Indiai-óceáni Terület
Belgium
Barbados
Brunei Szultanátus
Bosznia-Hercegovina
Belize
Christmas Island
Bulgária
Bermuda
Dél-Korea
Ciprus
Brit Virgin-szigetek
Észak-Korea
Csehország
Caribbean Netherlands
Fülöp-szigetek
Dánia
Costa Rica
Grúzia
Egyesült Királyság
Curaçao
Hongkong
Észak-Macedónia
Dominikai Közösség
India
Észtország
Dominikai Köztársaság
Indonézia
Fehéroroszország
Egyesült Államok
Japán
Feröer-szigetek
El Salvador
Kambodzsa
Finnország
Grenada
Kazahsztán
Franciaország
Grönland
Kína
Gibraltár
Guadeloupe
Kirgizisztán
Görögország
Guatemala
Kókusz-szigetek
Guernsey
Haiti
Laosz
Hollandia
Honduras
Makaó
Horvátország
Jamaica
Malajzia
Írország
Kajmán-szigetek
Maldív-szigetek
Izland
Kanada
Mianmar (Burma)
Jersey
Kuba
Mongólia
Lengyelország
Martinique
Nepál
Lettország
Mexikó
Örményország
Liechtenstein
Montserrat
Pakisztán
Litvánia
Nicaragua
Srí Lanka
Luxemburg
Panamaváros
Szingapúr
Magyarország
Puerto Rico
Tádzsikisztán
Málta
Saint Kitts és Nevis
Tajvan
Man-sziget
Saint Lucia
Thaiföld
Moldova
Saint Pierre és Miquelon
Türkmenisztán
Monaco
Saint Vincent és a Grenadine-szigetek
Üzbegisztán
Montenegró
Saint-Barthélemy
Vietnam
Németország
Saint-Martin
Norvégia
Sint Maarten
Olaszország
Trinidad és Tobago
Oroszország
Turks- és Caicos-szigetek
Portugália
Virgin-szigetek
Románia
San Marino
Spanyolország
Svájc
Svalbard and Jan Mayen
Svédország
Szerbia
Szlovákia
Szlovénia
Ukrajna
Vatikán