Ravatherm XPS X ETICS B

Single-layer XPS extruded polystyrene foam sheet with a rough finish obtained by milling the surface skin and: anthracite gray in color (additivated with Carbon Pure); with VOC Emission classified A+ according to Decr. no 211-321 of 2011; produced with PolyFR flame retardant; provided with ISO 14025 Environmental Product Declaration (EPD) and complying with Minimum Environmental Criteria (CAM) DM 23-06-2022; with sharp-edged finish on all four sides (type RAVATHERM™ XPS X ETICS B)

-Resistance to compression at 10% deformation according to EN 826 equal to 300 kPa
-Tensile strength according to EN 1607 equal to 200 kPa
-Shear strength according to EN 12090 equal to 200 kPa
-Water absorption by immersion according to EN 12087 equal to 1.5 percent by volume
-Resistance factor to water vapor passage μ 100 according to EN 12086
-Reaction to fire European Class E according to EN 13501-1
-Thermal conductivity at 10°C according to EN 13164, 0.030 W/mK for thicknesses

Specifikáció

Thermal resistance
Thickness   TR [m2.K/W]   λD [W/mK]
20mm   0.65 0.030
30mm   1.00   0.030
40mm 1.35 0.030
50 mm 1.65 0.030
60 mm 1.95   0.031
70mm   2.25   0.031
80 mm    2.60 0.031
100 mm 3.20 0.031
120 mm 3.85 0.031
140 mm 4.50   0.031
Compressive strength at 10% strain1 : CS(10\Y) = 300 kPa
Tensile strength1 : TR = 200 kPa
Shear strength SS = 200 kPa
Vapor diffusion resistance factor μ : MU = 100
Long-term water absorption by total immersion WL(T) = 0.7%
Water absorption after freeze-thaw cycles : FTCD = 1%
Dimensional stability at conditioned temperature and humidity (70°C, 90%) : DS(70,90)<5%
Coefficient of linear thermal expansion (typical value) : 0.07 mm/(m.K)
Reaction to fire (Euroclass) : E
Maximum operating temperature : -50/+75°C
Dimensional tolerances
Thickness : T3 ±3 mm
Width :0.0/+3mm
Length : 0/+10
Dimensions
Thickness : 30 - 120mm
Width : 600mm
Length : 1250mm
Specific heat : 1450 J/(Kg.K)
Profiles : sharp edge on all 4 sides
Surface finish : skinless
Closed cell content : ≥95%
Designation code : XPS - EN 13164 - T3 - CS(10\Y)300 - DS(70,90) - WL(T)1.5 - TR200 - SS200 - MU100
1) 1 Measured in the direction of thickness
2) Certified values for thicknesses >120mm
1 N/mm² = 10³ kPa = 1MPa