BIM objektumok - Ingyenes letöltés! HMS-15 Cinema Surround Loudspeakers

HMS-15 Cinema Surround Loudspeakers

The HMS-15's transducers include a 15-inch low-frequency, long-excursion cone driver and a 3-inch diaphragm high-frequency compression driver on a constant-directivity 80-degree horizontal by 50-degree vertical horn. The HMS-15 requires two channels of DC power from an MPS-488HP or MPS-482HP external power supply. The HMS-15AC model is available for AC powered installations.

The HMS-15AC is an AC-powered version of the HMS-15. Its Intelligent AC™ power supply provides automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression. The HMS-15AC is optionally available with its own onboard RMS™ remote monitoring system module for comprehensive monitoring of loudspeaker parameters from a Mac or Windows-based computer.

Features & Benefits

Exceptional fidelity and extended high frequency performance
Constant-directivity horn yields uniform response throughout coverage area
Seamless integration with Acheron screen channel loudspeakers and X-800C and X-400C cinema subwoofers
Extraordinarily flat amplitude and phase response for tonal accuracy
IntelligentDC power affords the flexibility of lengthy cable runs to the HMS-5, HMS-10, HMS-12, and HMS-15 without conduits
Optional mounting options provide multiple configurations for attachment to walls, ceilings, or hanging clamps

Solutions

Cinemas and theaters
Screening rooms
Surround mixing for production and postproduction facilities
High-end private theaters
Immersive surround applications

Specifikáció

HMS-15
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45 degrees; linear peak SPL, measured with pink noise, 128.5 dB at 1 meter, free field. Coverage shall be 80-degree horizontal by 50-degree vertical.
The loudspeaker shall be equipped with dual Phoenix 5-pin male connectors (two pins for DC power and three pins for balanced audio). Power requirements for the loudspeaker shall be a Meyer Sound MPS‑488HP IntelligentDC power supply.
Components shall be mounted in a multi-ply hardwood enclosure with a black textured finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be 19.00 inches wide x 29.10 inches high x 12.50 inches deep (483 mm x 739 mm x 318 mm) without mounting bracket. Weight shall be 60 lbs (27.2 kg).
The loudspeaker shall be the Meyer Sound HMS‑15.
HMS-15AC
The loudspeaker shall be a self-powered, full-range system with an onboard 2-channel amplifier and internal processing that shall include equalization, phase correction, signal division, and driver protection. Transducers shall include one 15-inch long-excursion cone driver and one 3-inch diaphragm compression driver. The crossover point shall be 680 Hz.
Performance specifications, measured at 1/3-octave resolution, for a typical production unit shall be: operating frequency range, 50 Hz to 18 kHz; phase response, 290 Hz – 18 kHz ±45 degrees; linear peak SPL, measured with pink noise, 128.5 dB at 1 meter, free field. Coverage shall be 80-degree horizontal by 50-degree vertical.
Audio connectors shall be XLR 3-pin, female and male, accommodating balanced audio, or XLR 5-pin, accommodating both balanced audio and RMS. The internal power supply shall perform automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100–240 V AC at 50–60 Hz. Maximum long-term continuous current draw shall be 1.3 A rms at 115 V AC, 0.7 rms at 230 V AC, and 1.5 A rms at 100 V AC. AC power connectors shall be powerCON 20 with loop output. The loudspeaker shall optionally include the RMS remote monitoring system module.
Components shall be mounted in a multi-ply hardwood enclosure with a black textured finish. The cabinet shall include rear and side attachment points for optional mounting. The grille shall be an acoustically transparent, detachable, black cloth-covered frame. Dimensions for the loudspeaker shall be 19.00 inches wide x 29.10 inches high x 12.50 inches deep (483 mm x 739 mm x 318 mm) without mounting bracket. Weight shall be 64 lbs (29.0 kg).
The loudspeaker shall be the Meyer Sound HMS‑15AC.
Keyword: Cinema, Surround, Loudspeaker, Loudspeakers