GridSpan™ Translucent FRP Skylight Systems

GridSpan™ Translucent FRP Skylight Systems

GridSpan™ translucent panel skylights feature a lightweight sandwich panel design with fiberglass reinforced polymer (FRP) face sheets that provide light and solar heat gain control. Their high thermal performance and unique aesthetic make them a versatile design tool that’s customizable for a range of applications. Specialty configurations for hurricane and blast protection, mixed glazed systems that integrate glass glazing, and more are also available.

Product Highlights

GridSpan™ is available with a variety of insulation options and a 4” panel option, enhancing thermal performance.
Numerous standard shapes (pyramids, polygons, single slopes, ridges) as well as fully custom designs
Standard or custom grid patterns allow for design flexibility
FRP face sheet is available in a range of colors
High-performance sealants protect against air and water infiltration
Built-in gutters on framing members provide moisture management
Thermally broken panels and framing available for enhanced condensation resistance
Individual panels up to 5 feet wide and 20 feet long (depending on load requirements)
Spectra-Grid™ color option provides a stained-glass-like look
Numerous finish options available – from clear anodize to custom color matching
Allows for integration of glass glazing for a combination of light control and views

Specifikáció

- Glazing Panel Thickness: 2.75 in (69.85 mm) & 4 in (101.6 mm)
- Panel Width: Up to a Maximum of 5 ft nominal (60 in) (1524 mm)
- Panel Length: Up to 20 ft long (may vary with load requirements)
- Panel Weight: 1.5-2 lbs/ft²
Base Options
- Technology: Ultimate Series™ face sheet technology for long-term performance
- Glazing Color Options: Interior: Crystal or White, Exterior: Crystal, White, Ice Blue, Aqua, Desert Rose, Tan (Consult KLA for other custom options)
Thermal Performance (U-Value)
- 2.75-inch system U-Factor - NFRC certified - 0.59 to 0.22 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system U-Factor - NFRC certified - 0.22 to 0.17 (subject to color selection and other options - see data sheet for full details and performance)
- 2.75-inch system SHGC - NFRC certified – 0.45 to 0.08 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system SHGC - NFRC certified - 0.15 to 0.06 (subject to color selection and other options - see data sheet for full details and performance)
- 2.75-inch system Visible Transmittance - NFRC certified - 0.45 to 0.04 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system Visible Transmittance - NFRC certified - 0.16 to 0.02 (subject to color selection and other options - see data sheet for full details and performance)
Certification + Test Results
- Code Compliance, IBC - ASTM D635, D1929, E84, UL723, - CC1 Rating (Interior Sheet), CC2 Rating (Exterior Sheet) (Complies as specifically detailed in the ESR-2855 report)
- Uniform Load Structural / Spans - ASTM E330 - Span: 6ft up to 16 ft - Consult KLA for job specific span capabilities
- High Velocity Hurricane Zones - TAS 201/202/203 - Missile Impact Level D, Up to 65psf
- Water Penetration - ASTM E331 - Pass at 15 psf
- Air Infiltration - ASTM E283 - Pass
- Impact Strength - UL 972 - Standard Exterior Sheet - five impacts at 64 ft-lb / High-Impact Exterior Sheet - 200 ft-lbs - no penetration / High Impact Interior Sheet - 245 ft-lbs - no penetration / Class “A” Sheet - 245 ft-lbs - no penetration / Section 6.3 (Outdoor Impact): Material shall withstand five 40ft-lb impacts / Section 6.4 (Indoor Impact): Material shall withstand five 50ft-lb impacts / Section 6.5 (High Energy Impact): Material shall withstand one 200ft-lb impact
- Structural Performance - AAMA/WDMA/CSA 101/I.S.2/ A440-05 REQ. Sect - No permanent deformation > 0.2%
- Taber Abrasion Test - ASTM D4060
- Color Difference* - ASTM D2244
*For additional details and testing contact KLA

Műszaki specifikáció

Egyedi azonosítógridspan-translucent-frp-skylight-systems
TermékcsaládDaylighting Systems
TermékcsoportTranslucent Skylight Systems
TípusObjektum (egy termék)
Megjelenés dátuma2025-03-07
Verziószám1

Linkek

Kapcsolódó adatok

Gyártás helyeEgyesült Államok

Besorolások

BIMobject kategóriaAblakok - Skylights
IFC besorolásTető
Uniclass 2015 kódSs_30_10_30_20
Uniclass 2015 leírásGlazed unit roof framing systems
CSI MasterFormat 2014 kód08 45 23
CSI MasterFormat 2014 névFiberglass-Sandwich-Panel Assemblies
OmniClass szám23-13 33 27 19
OmniClass névGlazed Roof Structures

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek