Termékek közzététele
ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier
ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier
    ARDEX

    ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

    ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

    Key Features

    • Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
    • For RH readings up to 100%
    • For absorbent concrete
    • No minimum profile required
    • No priming required prior to installation of ARDEX underlayments
    • Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
    • One-component system
    • Ready for use*, resealable and reusable
    • Easy to use and apply
    • Water-based, Zero VOC
    • ASTM E96 < .1 perms

    *As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

    Specifikáció
    • Installation

      Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
      Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)

      Performance

      Effect of 14 pH Solution (ASTM D1308): No effect
      Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
      Install Underlayment: 1 – 24 hours
      VOC: 0 g/L
      Packaging: One 5 gal. (19 L) pail
      Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
      Shelf Life: 1 year, if unopened
      Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

      Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

    Műszaki specifikáció
    • Egyedi azonosítóArdex-vb-100
    • TermékcsaládMoisture Control System
    • TermékcsoportOne Component Moisture Control System
    • TípusObjektum (egy termék)
    • Megjelenés dátuma2024-02-21
    • Verziószám1
    Kapcsolódó adatok
    • Elsődleges anyagPolymer-modified cementitious
    Besorolások
    • BIMobject kategóriaBurkolás - Coatings & Coverings
    • IFC besorolásFloor
    • UNSPSC névFlooring
    • UNSPSC kód301617
    • Uniclass 2015 kódEF_30_20
    • Uniclass 2015 leírásFloors
    • CSI MasterFormat 2014 kód09 60 00
    • CSI MasterFormat 2014 névFlooring
    • OmniClass szám23-15 17 11
    • OmniClass névFlooring Specialties and Accessories
    • CSI UniFormat II kódC3020
    • CSI Uniformat II névFloor Finishes

    Termék elérhetősége

    Észak-Amerika
    Anguilla
    Antigua és Barbuda
    Aruba
    Bahama-szigetek
    Barbados
    Belize
    Bermuda
    Brit Virgin-szigetek
    Caribbean Netherlands
    Costa Rica
    Curaçao
    Dominikai Közösség
    Dominikai Köztársaság
    Egyesült Államok
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Kajmán-szigetek
    Kanada
    Kuba
    Martinique
    Mexikó
    Montserrat
    Nicaragua
    Panamaváros
    Puerto Rico
    Saint Kitts és Nevis
    Saint Lucia
    Saint Pierre és Miquelon
    Saint Vincent és a Grenadine-szigetek
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad és Tobago
    Turks- és Caicos-szigetek
    Virgin-szigetek