Ponzio WS75THI window

Traduit par Google,

Le système permet la réalisation de fenêtres aluminium 1, 2 et 3 battants, battantes, porte fenêtres, porte à une ou plusieurs portes. Système d'ouverture Wasistas, oscillo-battant, fenêtre pivotante ou fenêtre projetée. Tous les systèmes Ponzio se déclinent en différentes solutions que vous trouverez sur nos catalogues techniques, téléchargeables sur notre site ponzioaluminium.com au format PDF. Voici les caractéristiques techniques du système en question : • Isolation thermique : Uf= 1,1 W/m2K jusqu'à Uf= 2,5 W/m2K • Perméabilité à l'air : Classe 4 • Étanchéité : E1500 • Résistance au vent : C5 • Isolation acoustique : 46 dB • Résistance à l'effraction : RC3 * REMARQUE : les données indiquent les valeurs pour une typologie particulière du WS75THI avec des dimensions spécifiques. Les valeurs de la typologie sélectionnée doivent être déterminées individuellement.

Spécification

Supply and window installation realized with the “WS 75 THI” system. Section bars are extruded in alloy of aluminium 6060 (UNI 9006/1), T6 supply state (TA 16), dimensional tolerances and thicknesses UNI EN 12020-02. The frame will have to have 75/89 mm. total depth. The wing will have 81/82,5 mm. depth with heights of the tubular different measurement room for the windows, window doors and in the increased version for the doors, in order to have a proportionate resistance to the solicitations applied to the window. The seal system will be: to joint opened (with central gasket and extension in Epdm with fin of seal in support directed to the suitable inclined wing profile plan) or overlapping. The thermal insulation principle: the internal profile and the external profile are connected with little bars of insulating material with very low conductivity (λ= 0.21-0.30 W/m2K) in order to ensure a good thermal cutting. All this is increased by the presence of a under glass and under frame gasket that contributes to the achievement of a thermal transmittance value “Uw” reduced. Glass gaskets in Epdm with the uobj (leccare) - lip ensure a better thermal and acoustic system performance. Frame and wing section bar corner joints are made through suitable corner joints. In the cross one lower of the frame will have to be practised some slots, concealed by suitable hoods, which will allow the water unloading. In the windows and doors to two or more wings, the central section will be realized by carryover section bar that it allows the beat inversion and that it changes according to the typologies. Be the frame section bars and the glass pane ones are supplied with gasket quarry for the glass sealing. Profiles for strip and base taken back are supplied with kernel what, subject to manufacturing of the section bar, allows the assembly with struts through suitable screws. The superficial section bar finish can be made through anodizing (with prescriptions dictated by the QUALANOD - EURAS/EWAA good quality mark) in the various shades, after undergoing a process of cleaning and pickling, or painting (with prescriptions dictated by the QUALICOAT good quality mark) in the many colours according to the tables RAL.

Spécifications techniques