Rada V10 Concealed Shower Valve

Traduit par Google,

Robinet de douche thermostatique séquentiel simple encastré approuvé TMV2 adapté aux applications commerciales et semi-domestiques. Le robinet de douche thermostatique séquentiel simple Rada V10 Built-in est fourni avec des crépines intégrées et des régulateurs de débit en option. Le mélangeur Rada V10 intègre une cartouche thermostatique éprouvée offrant une fiabilité prolongée sans entretien, protégée par des filtres d'entrée intégrés. Approbations : Buildcert TMV2 Scheme Approved. Douche à haute pression HP-S. Douche basse pression LP-S. Répertorié WRAS (Système consultatif sur la réglementation de l'eau). Conçu, fabriqué et pris en charge conformément aux systèmes de gestion de la qualité accrédités BS EN ISO 9001:2008 et aux systèmes de gestion de l'environnement BS EN ISO 14001:2004.

Spécification

Product Reference
Rada V10 Concealed Thermostatic Mixing Valve (1.1651.005)
Standard product features
Connections:
• Inlets: 15 mm compression.
• Outlet: ½” BSP Flat Face/ 15 mm compression.
• Standard connections are: hot- left, cold- right, outlet- bottom or top.
Operation:
The Rada V10 is operated via a single sequential control which when rotated initially opens the valve, then increases the temperature from cold to a pre-set maximum.
Temperature Range:
• The maximum temperature that can be selected is factory set at approximately 41˚C, but this can be reset on site if required.
• Cold water temperature range 5–20˚C.
• Hot water temperature range (recommended) 55–65˚C.
• Maximum hot water temperature 85˚C
Note: In the event of loss of either supply, the valve will automatically shut off. Minimum temperature of the blend to either supply is 12˚C.
For reasons of general safety, hot water storage temperatures should be maintained at between 60–65˚C where serving ablutionary applications. The mixing valve can accept temporary excursions above 85˚C without damage, however operation at such elevated temperatures is not recommended.
Pressure/ Flow Rates:
• Minimum dynamic supply pressure: 0.15 Bar
• Maximum dynamic supply pressure: 5 Bar
• Minimum flow rate: 3 L/min
• Maximum flow rate: 30 L/min
• Maximum pressure ratio: should not exceed 10:1 in favour of either supply during flow
• Maximum static pressure: 10 Bar.
Materials:
• Body: Chrome Plated DZR Brass.
• Lever: Chrome Plated Zinc Die Casting.