Julkaise tuotteesi
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
    Zurn

    ZF1201-U( )4-F_ One-Piece Faceplate Carrier System

    EZCarry® one-piece combination floor mounted foot/faceplate horizontal siphon jet system supplied for ( ) rough-in height features high performance Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep, 3” [76mm] no-hub connections, and extended 2” [51mm] vent. Faceplate enables prefabrication with strut channel or angle iron. Corrosion resistant adjustable 3” [76mm] diameter x 6” [152mm] coupling with integral test cap is designed to increase flow velocity and line carry. Labor saving Neo-Seal bonded gasket optimizes flow performace while reducing installation steps. Complete system includes one-piece combination foot/faceplate, heavy-duty 1/2” [13mm] rear anchor tie down (optional dependent on installation method, see intallation instructions), fixture bolts, trim and stud protectors. EZCarry® one-piece combination floor mounted foot/faceplate system complies with all applicable requirements of ASME A112.6.1M up to a 500 lb maximum static load.

    Compliance:

    Massachusetts Approved, ASME, UPC, IPC, NPCC

    Features:

    • One-piece faceplate set to rough-in heights with no complicated vertical adjustments required
    • Provides top and bottom connection points for common prefabrication methods
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • 500 lb max static load per ASME 112.6.1M
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • EZCarry hydraulically optimized waterway and sweep propels waste further to virtually eliminate clogging and downtime

    Models Available

    ZF1201-UL4-F55 / ZF1201-UL4-F75 | ZF1201-UR4-F55 / ZF1201-UR4-F75 | ZF1201-UD4-F75-A | ZF1201-UL4-F75-A-JC | ZF1201-UR4-F75-A-JC

    Keywords: strut channel, prefabrication, Water Closet Carrier System, CARRIER SYSTEM, prefabrication construction, EZCarry, FACEPLATE CARRIER SYSTEM, One-Piece Faceplate, carrier assemblies, ONE PIECE FACEPLATE, Flexible Prefabrication, vertical adjustments, ONE PIECE footplate

    Tekniset tiedot
    • Yksilöity viitezf1201-u-one-piece-combination-floor-faceplate-ezcarry-horizontal-water-closet
    • TuoteperheCarriers & Fixture Supports
    • TuoteryhmäWater Closet & Toilet Carriers
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2023-05-22
    • Painoksen numero3
    • Korkeus (tuumaa)5.5
    • Leveys (tuumaa)18
    • Syvyys (tuumaa)17
    Liittyviä
    • Ensisijainen materiaaliCast iron
    • Toissijainen materiaaliABS
    • Suunniteltu:Yhdysvallat
    • Nettopaino (paunaa)68
    Luokitus
    • BIMobject-luokkaPutkityöt - Vedenpoisto
    • IFC-luokitusSaniteettiterminaali
    • ETIM-koodiEC011338
    • ETIM-nimiAccessories for double wall/built-in element sanitary
    • Uniclass 2015 -koodiPr_20_85_09_96
    • Uniclass 2015 -kuvausWall-hung WC support brackets
    • CSI MasterFormat 2014 -koodi22 42 13.13
    • CSI MasterFormat 2014 -nimikeCommercial Water Closets
    • OmniClass-numero23-31 19 19
    • OmniClass-nimikeWater Closets