Julkaise tuotteesi
Simplex Vertical Multistage Booster Pump Package - RWP-2-SVM
Watts

Simplex Vertical Multistage Booster Pump Package - RWP-2-SVM

RWP-2-SVM Simplex Vertical Multistage Booster Pump Package provides water flow and pressure in RainCycle commercial rainwater harvesting systems. Rated for flows up to 80 GPM and 125 psi, this package includes Goulds e-SV vertical multi-stage pump to maximize energy efficiency, service life and reduce maintenance.

The package is pre-plumbed on a stainless steel skid base for fast installation and includes a check valve, safety pressure relief valves, isolation valves, and pressure gauges. A variable speed drive with a 4-20mA pressure sensor is included when ordered with a Rainwater Control Station using a CR, VP or VC control panel. The variable speed drive shall be installed on the Rainwater Control Station skid for ease of system installation, operation and maintenance.

* Simplex pumps are recommended for RainCycle systems with secondary water supply control valves in direct bypass configurations only.

Features

  • Includes a Goulds e-SV vertical multi-stage pump to maximize energy efficiency, service life, and reduce maintenance
  • Package is pre-plumbed on a stainless steel skid base for fast installation and includes a check valve, safety pressure relief valves, isolation valves, and pressure gauges
  • Variable speed drives with a 4-20mA pressure sensor are included when ordered with a Rainwater Control Station using a CR, VP, or VC control panel
  • The variable speed drive shall be installed on the Rainwater Control Station skid for ease of system installation, operation, and maintenance
Tekniset tiedot
  • Keywords: potable water, pressure, process, regulator, watts, watts regulator, plumbing, drainage, drains, booster pumps, pumps
Tekniset tiedot
  • Yksilöity viiteRWP-2-SVM
  • TuoteperheWater Quality & Rainwater Harvesting Solutions
  • TuoteryhmäRainwater Harvesting
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2020-08-10
  • Painoksen numero1
Liittyviä
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaPutkityöt - Pumput
  • UNSPSC-nimiPumps
  • UNSPSC-koodi401515
  • Uniclass 2015 -koodiPr_65_53_86_66
  • Uniclass 2015 -kuvausPressure booster pumps
  • CSI MasterFormat 2014 -koodi43 11 00
  • CSI MasterFormat 2014 -nimikeGas Fans, Blowers, Pumps and Boosters
  • OmniClass-numero23-27 17 00
  • OmniClass-nimikePumps
  • CSI UniFormat II -koodiD20
  • CSI UniFormat II -nimikePLUMBING

Alueellinen saatavuus

Pohjois-Amerikka
Kanada
Yhdysvallat