Southwest Solutions GroupSeuraa

Modular Panel Wire Partition

Tekniset tiedot

Tekniset tiedot

• Panel Construction

  • Customizable width (max 10ft per panel).
  • 8' or 10' height panel sections.
  • Frame is 1-1/4" x 1 1/4" x 1/8" hot rolled steel angle.
  • Standard Mesh is 10 gauge wire woven into 2" x 1" rectangular openings.
  • Panels available in mesh, expanded metal, sheet metal, or clear polycarbonate.
  • Angled frame and mesh design gives a clear view of the cage interior
  • Wire mesh panels may be used as walls or ceilings with proper reinforcement.

  Upright Construction

  • Upright posts made form 2" x 2" 14 gauge Square HSS Steel.
  • Posts include a welded base plate with floor anchors.
  • Posts may be anchored to the floor using 1" lag bolts that must be pinned or brazed once installed.
  • Additional base plate available for "sandwiching" data center floors.

  Door Construction

  • Single Hinged: 3' or 4' wide by 7' 3-1/4" high opening.
  • Double Hinged: 6' or 8' wide by 7' 3-1/4" high opening
  • Sliding Door: 3', 4', 5', 6', 8', or 10' widths and 8' or 10' tall opening.
  • Transom panel sized to match partition height.
  • Three 4" x 4" 10-gauge tight pin hinges per hinged door.
  • Sliding doors include four-wheel trolley trucks, a 16-gauge track, and hardware.
  • Inactive leaf secured by cane bolt (base) and chain bolt (top)
  • Padlock lug standard, cylinder, or digital locks available.
  • Universal construction works for left or right hand, inside or outside swing/slide.
  • Complete with two upright posts and hardware.
  • Custom size and no overhead obstruction doors available.

  Service Window Construction

  • 4' wide panel with a 24" x 21" window opening.
  • Transom panel sized to match partition height.
  • Sliding window panel secures in place from the inside when not in use.
  • Complete with two upright posts and hardware.
  • Custom sizes available.

  System Assembly

  • Mount two or more panels between posts to reach wall height.
  • Panel height may be adjusted to mount flush to the top and bottom to meet DEA storage requirements.
  • Standard-size panels work in wall and ceiling configurations.
  • Wall has a minimum of 1-1/2" horizontal reinforcement at least every 60 inches.
  • Clear spanned ceiling up to 35'-0" across.
  • Standard 3/8" mounting and assembly hardware.
  • Assembly hardware is inaccessible from the secured side of the partition.
  • Single-hinged, double-hinged, sliding, and vertical rise doors available.
  • Self-closing and self-locking door hardware available for secure projects.
  • Keyed or digital locks may be added for additional security
  • Custom size panels and special heights available on request.
  • Frames, mesh, and uprights are finished in a matching high-quality powder coat color.
  • Custom colors available with a paint chip or RAL number.

  Sustainability

  • Wire mesh contains up to 95% pre and post-consumer recycled content
  • Roll-formed angle steel contains up to 71% pre and post-consumer recycled content

Tekniset tiedot

Tekniset tiedot

• Yksilöity viiteSSG_Wire_Partition_WIR
• TuoteperhePublic Safety
• TuoteryhmäWeapon Storage, Lockers, Workstations, Mobile Shelving and Detention
• TyyppiObjekti (yksittäinen objekti)
• Julkaisupäivä2021-01-29
• Painoksen numero1
• Syvyys (tuumaa)7

Linkit

Linkit

• Tuotteen urlhttps://fetchbim.com/product/584/ssg-wire-partition-wir
• Tekninen kuvaushttps://app.fetchbim.com/Family/f2e56162-42bd-435b-aad9-6cd0548a898d/File/PDF-SpecManual

Liittyviä

Liittyviä

• Ensisijainen materiaaliJauhepinnoitettu teräs
• Suunniteltu:Yhdysvallat
• Valmistettu:Yhdysvallat

Luokitus

Luokitus

• BIMobject-luokkaKalusteet - Hyllyt & varasto
• IFC-luokitusKaluste
• CSI MasterFormat 2014 -koodi10 22 13
• CSI MasterFormat 2014 -nimikeWire Mesh Partitions
• OmniClass-numero23-15 11 15 17 11
• OmniClass-nimikeWire Mesh Partitions
• CSI UniFormat II -koodiC1010
• CSI UniFormat II -nimikePartitions