CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 reviews)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Tekniset tiedot

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Tekniset tiedot

Yksilöity viiteCD60GS
TuoteperheDampers for Air Ductwork
TuoteryhmäCommercial Control Dampers
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2022-07-28
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ruskin.com/model/cd60gs-genset
Tekninen kuvaushttps://www.ruskin.com/doc/Id/9866
Tarjouksen tiedothttps://www.ruskin.com/doc/Id/10091

Liittyviä

Ensisijainen materiaaliGalvanoitu teräs
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaLVI - Kanavistot
IFC-luokitusVaimennin
UNSPSC-nimiVentilation dampers
UNSPSC-koodi40101504
Uniclass 2015 -koodiPr_65_65_24
Uniclass 2015 -kuvausDuct dampers
CSI MasterFormat 2014 -koodi23 09 13.43
CSI MasterFormat 2014 -nimikeControl Dampers
OmniClass-numero23-33 29 00
OmniClass-nimikeHVAC Dampers
CSI UniFormat II -koodiD3090
CSI UniFormat II -nimikeOther HVAC Systems & Equipment

Alueellinen saatavuus

Eurooppa	Aasia	Pohjois-Amerikka	Afrikka	Etelä-Amerikka	Oseania
Ahvenanmaa	Afganistan	Anguilla	Algeria	Argentiina	Amerikan Samoa
Alankomaat	Arabiemiirikunnat	Antigua ja Barbuda	Angola	Bolivia	Australia
Albania	Armenia	Aruba	Benin	Brasilia	Cooksaaret
Andorra	Azerbaidžan	Bahamasaaret	Botswana	Chile	Fidzi
Belgia	Bahrain	Barbados	Burkina Faso	Ecuador	Guam
Bosnia ja Hertsegovina	Bangladesh	Belize	Burundi	Falklandinsaaret (Malvinassaaret)	Kiribati
Bulgaria	Bhutan	Bermuda	Djibouti	Guyana	Marshallsaaret
Espanja	Brittiläinen Intian valtameren alue	Brittiläiset Neitsytsaaret	Egypti	Kolumbia	Mikronesian liittovaltio
Färsaaret	Brunei	Caribbean Netherlands	Eritrea	Paraguay	Nauru
Gibraltar	Etelä-Korea	Caymansaaret	Etelä-Afrikka	Peru	Niue
Guernsey	Filippiinit	Costa Rica	Etelä-Sudan	Ranskan Guayana	Norfolkinsaari
Huippuvuoret	Georgia	Curaçao	Etiopia	Surinam	Palau
Irlanti	Hong Kong	Dominica	Gabon	Uruguay	Papua-Uusi-Guinea
Islanti	Indonesia	Dominikaaninen tasavalta	Gambia	Venezuela	Pitcairnsaaret
Italia	Intia	El Salvador	Ghana		Pohjois-Mariaanit
Itävalta	Irak	Grenada	Guinea		Ranskan Polynesia
Jersey	Iran	Grönlanti	Guinea-Bissau		Salomonsaaret
Kreikka	Israel	Guadeloupe	Kamerun		Samoa
Kroatia	Japani	Guatemala	Kap Verde		Timor-Leste
Kypros	Jemen	Haiti	Kenia		Tokelau
Latvia	Jordania	Honduras	Keski-Afrikan tasavalta		Tonga
Liechtenstein	Joulusaari	Jamaika	Komorit		Tuvalu
Liettua	Kambodža	Kanada	Kongo		United States Minor Outlying Islands
Luxemburg	Kazakstan	Kuuba	Kongon demokraattinen tasavalta		Uusi-Kaledonia
Malta	Kiina	Martinique	Länsi-Sahara		Uusi-Seelanti
Mansaari	Kirgisia	Meksiko	Lesotho		Vanuatu
Moldova	Kookossaaret	Montserrat	Liberia		Wallis ja Futuna
Monaco	Kuwait	Nicaragua	Libya
Montenegro	Laos	Panama	Madagaskar
Norja	Libanon	Puerto Rico	Malawi
Pohjois-Makedonia	Macao	Saint Kitts ja Nevis	Mali
Portugali	Malediivit	Saint Lucia	Marokko
Puola	Malesia	Saint Vincent ja Grenadiinit	Mauritania
Ranska	Mongolia	Saint-Barthélemy	Mauritius
Romania	Myanmar (Burma)	Saint-Martin	Mayotte
Ruotsi	Nepal	Saint-Pierre ja Miquelon	Mosambik
Saksa	Oman	Sint Maarten	Namibia
San Marino	Pakistan	Trinidad ja Tobago	Niger
Serbia	Palestiinalaisalueet	Turks- ja Caicossaaret	Nigeria
Slovakia	Pohjois-Korea	Yhdysvallat	Norsunluurannikko
Slovenia	Qatar	Yhdysvaltain Neitsytsaaret	Päiväntasaajan Guinea
Suomi	Saudi-Arabia		Reunion
Sveitsi	Singapore		Ruanda
Tanska	Sri Lanka		Saint Helena
Tsekin tasavalta	Syyria		Sambia
Ukraina	Tadžikistan		São Tomé ja Príncipe
Unkari	Taiwan		Senegal
Valko-Venäjä	Thaimaa		Seychellit
Vatikaanivaltio	Turkki		Sierra Leone
Venäjä	Turkmenistan		Somalia
Viro	Uzbekistan		Sudan
Yhdistynyt kuningaskunta	Vietnam		Swasimaa
			Tansania
			Togo
			Tsad
			Tunisia
			Uganda
			Zimbabwe