Name: Aluminum Ships Stairs
Rating: 4.4 (22 reviews)

Aluminum Ships Stairs

4.4(22 reviews)

This stair solves:

Ships Stairs (ships ladders) for rooftop access, mezzanine access, or crossover obstacles
Four types of Ships Stairs (ships ladders): walk-thru, to roof hatch access, to a platform, or crossover with a platform in the middle
Uses less floor space (footprint), if not feasible to use standard stair
Easier climb than a vertical ladder

Reduce Costs and Increase Quality

Reduce maintenance costs by using an aluminum stair which is naturally corrosion resistant with minimal ongoing maintenance or upkeep compared to steel stairs that corrode over time. Reduce installation costs by using an aluminum stair which is a third the weight of steel, so it is easier to install, requiring less equipment. Aluminum is high strength and is used in planes, cars, trucks, buses, trains, and buildings.

Reduce Risks

With over 75 years of experience providing access solutions, we know the codes and are experts in this area. Units are built to meet or exceed OSHA 1910 Subpart D design criteria. Without the correct stair, there could be injury, liability, and loss of money, which puts companies' reputations and lives at stake.

Aesthetically Pleasing and Sustainable Material

The standard aluminum mill finish will not rust or stain the surrounding structure. Powder Coating is available to match the surroundings or stand out for safety. Clear Anodizing is available to increase corrosion, abrasion, and wear resistance. In addition, aluminum is 100 percent recyclable and retains its properties indefinitely.

Key Details of Stair

Fully Welded construction used throughout
6" x 1.95" x .225" aluminum channel stringers for heights over 12'
5" x 2" x 3/16" aluminum channel stringers for heights 12' and under
Treads are deeply serrated aluminum channel (standard) both welded and bolted to the stringer, bar grating treads available
Treads tested to withstand over 2700-pound loading per tread
Handrails on both sides, 1-1/4" Sch 40 Aluminum Pipe
60 to 70-degree pitch
Treads widths up to 44" (clear tread)
Ladder Safety Post available for roof hatch exit
5 Year Warranty

Tekniset tiedot

SECTION 05 51 33.16
INCLINED METAL LADDERS
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Aluminum Ships Stairs.
1.2 RELATED SECTIONS
A. Section 05 12 00 - Structural Steel Framing: Roof structure and opening support.
B. Section 05 50 00 - Metal Fabrications: Miscellaneous metal supports.
C. Section 06 10 00 - Rough Carpentry: Roof framing and opening support.
D. Section 07 42 00 - Wall Panels: Roof curb flashing.
1.3 REFERENCES
A. OSHA 1910.25: Stairways.
1.4 SUBMITTALS
A. Submit under provisions of Section 01 30 00.
B. Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
C. Shop Drawings for Stairs:
1. Plan and section of stair installation.
1.5 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store stair until installation inside under cover. If stored outside, under a tarp or suitable cover.
1.6 WARRANTY
A. Limited Warranty: Five years against defective material and workmanship, covering parts only, no labor or freight. Defective parts, if deemed so by the manufacturer, will be replaced at no charge, freight excluded, upon inspection at manufacturer's plant which warrants same.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Precision Ladders, LLC, which is located at: P. O. Box 2279; Morristown, TN 37816-2279; Toll Free Tel: 800-225-7814; Tel: 423-586-2265; Fax: 423-586-2091; Web: www.PrecisionLadders.com
B. Substitution requests will be considered in accordance with provisions of Section 01 60 00.
2.2 ALUMINUM SHIPS STAIR
A. Aluminum Ships Stair and Components: Stair, mounting brackets and handrails on both sides.
1. Model: SL-** (** = height in vertical inches) Aluminum Ships Stair as manufactured by Precision Ladders, LLC.
2. Capacity: Unit shall support a 1,000 lb (454 kg) total load without failure.
3. Degree of Incline: 60 to 70 degrees.
4. Performance Standard: Units designed and manufactured to meet or exceed OSHA 1910.25.
B. Components:
1. Stair Stringer: 5 inch by 2 inch by 3/16 inch (127 mm by 51 mm by 5 mm) extruded 6005-T5 aluminum channel.
2. Stair Treads: 5-3/16 inch by 1-1/8 inch by 1/8 inch (131 mm by 29 mm by 3 mm) extruded 6005-T5 aluminum with serrated slip resistance surface standard. 1-1/4 inch by 1-1/4 by 1-1/4 inch angle welded to underside of treads. Treads shall be welded and bolted to stringer with 1/4” stainless steel bolts.
3. Stair Mounting Brackets:
a. Floor Brackets: 2 inch by 3 inch by 1/4 inch (51 mm by 76 mm by 6 mm) aluminum angle.
b. Top Bracket: 4-3/4 inch by 5 inch by 1/4 inch (121 mm by 127 mm by 6 mm) aluminum angle.
4. Handrails: 1-1/4 inches (32 mm) Schedule 40, 6005-T5 aluminum pipe provided with internal aluminum fittings.
5. Platform:
a. Surface: Platforms 9 Sq Ft or less shall be made of standard tread material. Platforms larger than 9 Sq Ft shall have a bar grating surface.
b. Toe Boards: 4 inch by 1/4” 6005 T-5 aluminum.
c. Handrails: 1-1/4 inches (32 mm) Schedule 40, 6005-T5 aluminum pipe provided with internal aluminum fittings.
6. Finishes:
a. Standard: Mill finish on aluminum stair components.
b. Optional Finishes
1. Powder Coated
2. Clear Anodized
C. Options
1. Tread material: bar grating and various types of formed plate.
2. Extend-A-Rail, ladder safety post attached to one side of stair to assist the climber in entering or exiting a hatch.
3. 42 inch handrail extension (walk-thru) for accessing platforms, landings or elevated work spaces.
4. Crossover stairs with platform between two stairs.
2.3 FABRICATION
A. Completely fabricate stair ready for installation before shipment to the site.
PART 3 EXECUTION
3.1 EXAMINATION
A. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
B. Examine materials upon arrival at site. Notify the carrier and manufacturer of any damage.
3.2 INSTALLATION
A. Install in accordance with approved submittals.
3.3 PROTECTION
A. Protect installed products until completion of project.
B. Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION

Tekniset tiedot

Yksilöity viiteships-stairs
TuoteperheStairs
TuoteryhmäShips
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2021-08-26
Painoksen numero1

Linkit

Tuotteen urlhttps://precisionladders.com/products/ships-stairs/
Esittelyvideohttps://youtu.be/fCSeuoSisfM
Tuotesertifiointihttps://app.box.com/s/082k4k263sa3iob4celoqbq8pmzkwfts

Liittyviä

Ensisijainen materiaaliAlumiini
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaRakentaminen - Stairs
IFC-luokitusPortaat
Uniclass 2015 -koodiEF_35_10
Uniclass 2015 -kuvausStairs
OmniClass-numero23-17 23 17
OmniClass-nimikeStairs
CSI UniFormat II -koodiC2010
CSI UniFormat II -nimikeStair Construction

Pohjois-Amerikka

Anguilla

Antigua ja Barbuda

Aruba

Bahamasaaret

Barbados

Belize

Bermuda

Brittiläiset Neitsytsaaret

Caribbean Netherlands

Caymansaaret

Costa Rica

Curaçao

Dominica

Dominikaaninen tasavalta

El Salvador

Grenada

Grönlanti

Guadeloupe

Guatemala

Haiti

Honduras

Jamaika

Kanada

Kuuba

Martinique

Meksiko

Montserrat

Nicaragua

Panama

Puerto Rico

Saint Kitts ja Nevis

Saint Lucia

Saint Vincent ja Grenadiinit

Saint-Barthélemy

Saint-Martin

Saint-Pierre ja Miquelon

Sint Maarten

Trinidad ja Tobago

Turks- ja Caicossaaret

Yhdysvallat

Yhdysvaltain Neitsytsaaret

Aluminum Ships Stairs

Samankaltaisia tuotteita

Valmistajille

Tietoja

Oikeudelliset asiat