Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Tekniset tiedot

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Tekniset tiedot

Yksilöity viitemeyersound-ashby
TuoteperheLoudspeakers
TuoteryhmäULTRA
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2020-03-12
Painoksen numero2

Linkit

Tuotteen urlhttps://meyersound.com/product/ashby/
Asennusohjeethttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Tuotesertifiointihttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Tekninen kuvaushttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Liittyviä

Ensisijainen materiaaliAlumiini
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaElektroniikka - Audioelektroniikka
IFC-luokitusObjekti
Uniclass 2015 -koodiPr_70_75_36_50
Uniclass 2015 -kuvausLoudspeakers
CSI MasterFormat 2014 -koodi27 24 23
CSI MasterFormat 2014 -nimikeAudio-Video Devices
OmniClass-numero23-37 15 29 11 13
OmniClass-nimikeLoudspeakers

Alueellinen saatavuus

Eurooppa	Aasia	Pohjois-Amerikka	Afrikka	Etelä-Amerikka	Oseania
Ahvenanmaa	Afganistan	Anguilla	Algeria	Argentiina	Amerikan Samoa
Alankomaat	Arabiemiirikunnat	Antigua ja Barbuda	Angola	Bolivia	Australia
Albania	Armenia	Aruba	Benin	Brasilia	Cooksaaret
Andorra	Azerbaidžan	Bahamasaaret	Botswana	Chile	Fidzi
Belgia	Bahrain	Barbados	Burkina Faso	Ecuador	Guam
Bosnia ja Hertsegovina	Bangladesh	Belize	Burundi	Falklandinsaaret (Malvinassaaret)	Kiribati
Bulgaria	Bhutan	Bermuda	Djibouti	Guyana	Marshallsaaret
Espanja	Brittiläinen Intian valtameren alue	Brittiläiset Neitsytsaaret	Egypti	Kolumbia	Mikronesian liittovaltio
Färsaaret	Brunei	Caribbean Netherlands	Eritrea	Paraguay	Nauru
Gibraltar	Etelä-Korea	Caymansaaret	Etelä-Afrikka	Peru	Niue
Guernsey	Filippiinit	Costa Rica	Etelä-Sudan	Ranskan Guayana	Norfolkinsaari
Huippuvuoret	Georgia	Curaçao	Etiopia	Surinam	Palau
Irlanti	Hong Kong	Dominica	Gabon	Uruguay	Papua-Uusi-Guinea
Islanti	Indonesia	Dominikaaninen tasavalta	Gambia	Venezuela	Pitcairnsaaret
Italia	Intia	El Salvador	Ghana		Pohjois-Mariaanit
Itävalta	Israel	Grenada	Guinea		Ranskan Polynesia
Jersey	Japani	Grönlanti	Guinea-Bissau		Salomonsaaret
Kreikka	Jemen	Guadeloupe	Kamerun		Samoa
Kroatia	Jordania	Guatemala	Kap Verde		Timor-Leste
Kypros	Joulusaari	Haiti	Kenia		Tokelau
Latvia	Kambodža	Honduras	Keski-Afrikan tasavalta		Tonga
Liechtenstein	Kazakstan	Jamaika	Komorit		Tuvalu
Liettua	Kiina	Kanada	Kongo		United States Minor Outlying Islands
Luxemburg	Kirgisia	Kuuba	Kongon demokraattinen tasavalta		Uusi-Kaledonia
Malta	Kookossaaret	Martinique	Länsi-Sahara		Uusi-Seelanti
Mansaari	Kuwait	Meksiko	Lesotho		Vanuatu
Moldova	Laos	Montserrat	Liberia		Wallis ja Futuna
Monaco	Libanon	Nicaragua	Libya
Montenegro	Macao	Panama	Madagaskar
Norja	Malediivit	Puerto Rico	Malawi
Pohjois-Makedonia	Malesia	Saint Kitts ja Nevis	Mali
Portugali	Mongolia	Saint Lucia	Marokko
Puola	Myanmar (Burma)	Saint Vincent ja Grenadiinit	Mauritania
Ranska	Nepal	Saint-Barthélemy	Mauritius
Romania	Oman	Saint-Martin	Mayotte
Ruotsi	Pakistan	Saint-Pierre ja Miquelon	Mosambik
Saksa	Palestiinalaisalueet	Sint Maarten	Namibia
San Marino	Pohjois-Korea	Trinidad ja Tobago	Niger
Serbia	Qatar	Turks- ja Caicossaaret	Nigeria
Slovakia	Saudi-Arabia	Yhdysvallat	Norsunluurannikko
Slovenia	Singapore	Yhdysvaltain Neitsytsaaret	Päiväntasaajan Guinea
Suomi	Sri Lanka		Reunion
Sveitsi	Syyria		Ruanda
Tanska	Tadžikistan		Saint Helena
Tsekin tasavalta	Taiwan		Sambia
Ukraina	Thaimaa		São Tomé ja Príncipe
Unkari	Turkki		Senegal
Valko-Venäjä	Turkmenistan		Seychellit
Vatikaanivaltio	Uzbekistan		Sierra Leone
Venäjä	Vietnam		Somalia
Viro			Sudan
Yhdistynyt kuningaskunta			Swasimaa
			Tansania
			Togo
			Tsad
			Tunisia
			Uganda
			Zimbabwe