Domus - Domus Flowers - Decorative Paint

High quality decorative coating with irregular embossed

metal flakes. Such characteristic lends a precious aspect

to the interiors of the room.

SURFACE PREPARATION. Before applying the DOMUS FLOWERS effect it is

necessary to proceed to an adequate surface preparation by means of powder

or paste fillers (type FLYSTUK), subsequently sanded with abrasive papers (we

recommend a P120 grit type) after about 12 hours from the end application. After

sanding, removing any dirt or dust, apply a coat of FISSAMUR vinyl fixative diluted

with water in the ratio 1:1/1:3. After 4-5 hours from the application of the fixative,

apply 2 coats of Primer (UNIVERSAL PRIMER) with a roller at intervals of about 5-6

hours from each other. The Primer must be white or desired colored, considering

the color combination chosen for Domus Flowers. PRODUCT PREPARATION.

Before proceeding with the application, the flake must be mixed manually with the

neutral. APPLICATION METHODS. Decorative Spalter Brush and Plastic Spatula.

After 6-8 hours from the end of the application of the Primer, proceed with the

drafting of the Domus Flowers by crossing the brush strokes evenly until the wall is

completed. After 6-8 minutes lightly pass a plastic spatula, thus crushing the flake

to allow it to open completely. After 4 - 6 hours, the flattened flake will re-enter

the film thus obtaining, with great simplicity, a surface with a polychrome metallic

texture of large multi-colored flakes. Product yield. 5-6 sqm / L. Wash tools with

water. Toxicological data. The product is free of solvents and toxic substances. For

more information, request a technical and safety data sheet.

This product can be coloured with the Tinting Systems L’ANGELO and L’ANGELO 4OX.