Standing Seam Roof Magestic

Lindab Magestic is a newly developed and more advanced rust protection than normal galvanized. The material can be used up until corrosivity class C4. It is delivered in ZM310, meaning 310 grams per m2 and double side. Equivalent to 24 micron coating on each side. The base material is an extra soft tinsmith quality. The steel has practically no spring back so that tight seams can be achieved. The material can be both hand and machine seamed. Lindab Magestic will patinate over time. It can end up being dark grey, and already after a couple of months outside you can usually see how it has started to darken which gives a rustic and genuine feeling. Avoid greasy fingers or dirty gloves as it can make the surface age unevenly.

Tekniset tiedot

The base material in Magestic for standing seam roof is a DX54 and is 0,6mm thick, making 1 m2 weighing approximately 4,7 kg.

Tekniset tiedot

Yksilöity viitestanding-seam-roof-magestic
TuoteperheStanding Seam Roof
TuoteryhmäSteel
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2018-03-11
Painoksen numero1

Linkit

Tuotteen urlhttps://informationgateway.lindab.com/redirect/SeamlineProductInformation
Asennusohjeethttps://informationgateway.lindab.com/redirect/SeamlineInstallationInstruction
Tuotesertifiointihttps://informationgateway.lindab.com/redirect/SeamlineProductCertification
Tekninen kuvaushttps://informationgateway.lindab.com/redirect/SeamlineTechnicalDescription_Magestic

Liittyviä

Ensisijainen materiaaliGalvanoitu teräs
Suunniteltu:Ruotsi
Valmistettu:Ruotsi

Luokitus

BIMobject-luokkaRakentaminen - Katto
IFC-luokitusKatto
Uniclass 2015 -koodiSs_30_40_50
Uniclass 2015 -kuvausMetal sheet, fully supported roof and dormer covering systems
CSI MasterFormat 2014 -koodi07 61 00
CSI MasterFormat 2014 -nimikeSheet Metal Roofing
OmniClass-numero23-13 39 27 11 13
OmniClass-nimikeSheet Metal Roofing
CSI UniFormat II -koodiB30
CSI UniFormat II -nimikeROOFING