Performance characteristics:
CE mark acc. to DIN EN 13241-1
Door leaf:
Glazing frames made of aluminium extrusion profiles with steel end caps. Inner and outer finger trap protection. With bottom seal, intermediate seals and lintel seal made of EPDM, depth 42 mm.
Infill of top glazing frames with clear synthetic double panes, 26 mm, bottom glazing frame with PU infill, with Stucco-textured aluminium sheet covers on both sides, (FU) 26 mm. Optionally further infills on request.
Surface:
Exterior and interior of glazing frames anodised in E6/C0 DIN 17611. Optionally in 10 preferred colours, RAL to choose, metallic colours, British Standard or NCS colours on request.
Door guide:
Angle frame with side trap guard, made of hot-galvanized sheet steel, horizontal safety tracks and side seal made of EPDM.
Counterbalance via torsion springs, min. 25000 door cycles (standard). Optionally stronger torsion springs (more door cycles) on request.
Door operation:
Operator WA 400 with control A445. Optionally further model variants (operators/controls) on request.
Fitting:
Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door.
Note:
The floor in the area of the door opening must be horizontal across the entire door width. The exterior floor should be inclined away from the door directly in front of the door curtain.
Application areas: Logistics, commercial halls, industrial halls, warehouses, workshops, collective garages
4.6 (88)
