HörmannSeuraa

HRT, telescopic lip loading platform

Tekniset tiedot

Tekniset tiedot

• Note on use of bullet points: • for standard equipment to choose - for optional equipment Ordering width: • 2000 mm • 2100 mm • 2250 mm Ordering length (dock leveller installation height): • 2000 mm (650 mm) • 2500 mm (650 mm) • 2750 mm (650 mm) • 3000 mm (650 mm) Ramp width: 3500 mm Ramp height: … mm (975 to 1425, for angled arrangement at least 977) Note: Ramp height measured from the top edge of the platform (not top edge of running plate) to the bottom edge of the base on the front side. Note the required slope of 1% (for drainage) from the outer wall of the building! Dock leveller levelling dependent on ordering length and means of transport. In accordance with EN 1398, a max. slope of 12.5 % (approx. 7°) is permissible for all industrial truck types. Design: Dock leveller with torsional flexibility, platform with reinforcement profiles at the bottom side, electrohydraulic system with 2 main cylinders, welded steel frame Steel construction with adjustable pedestal feet, side elements can be loaded with 1000 kN/m² Front side pre-drilled for fastening buffers, safety equipment and optional extras such as docking assistance DAP, manoeuvring guide Light Guide LG, DAS support brackets, lorry safety harnesses from the forwarder Insulation panels, 50 mm thick, directly below the platform and lip, panel under lip moves when extending. Vertical and horizontal gap sealing, brush seals, seals made of tarpaulin material. Panel under platform: • Flush with the dock leveller at the front (for door guide on dock leveller) - Protruding 160 mm (for door guide in front of the dock leveller) • Carrying capacity: Rated load 60 kN acc. to EN 1398 Note: Restriction of total weight of industrial trucks with PU/Vulkollan rollers recommended to prevent lane grooves in the platform: For reach lift trucks max. 4 t, for industrial trucks max. 6 t. This figure does not change the rated load! Platform made of moulded, anti-slip steel (running plate S235). Platform material thickness: 8/10 mm Lip made of moulded, anti-slip steel (running plate S355). Application areas: Logistics, commercial halls, industrial halls, warehouses, in front of the hall

Tekniset tiedot

Tekniset tiedot

• Yksilöity viite1535
• TuoteperheDock levellers
• TuoteryhmäTelescopic lip dock levellers
• Julkaisupäivä2021-01-07
• Painoksen numero1

Linkit

Linkit

• Tuotteen urlhttps://architektenprogramm.hoermann.de/HAP/entry.php

Liittyviä

Liittyviä

• Ensisijainen materiaaliTeräs
• Toissijainen materiaaliTeräs
• Suunniteltu:Saksa
• Valmistettu:Saksa

Luokitus

Luokitus

• BIMobject-luokkaLastauslaitteet - Huoltolavat
• IFC-luokitusRamppi
• UNSPSC-nimiLift stations
• UNSPSC-koodi47101533
• Uniclass 2015 -koodiEF_35_20
• Uniclass 2015 -kuvausRamps
• CSI MasterFormat 2014 -koodi11 13 19.13
• CSI MasterFormat 2014 -nimikeLoading Dock Levelers
• OmniClass-numero23-23 23 17
• OmniClass-nimikeLoading Dock Ramps And Bridges
• CSI UniFormat II -koodiB2030
• CSI UniFormat II -nimikeExterior Doors