2AR 2″ ADJUSTABLE DOWNLIGHT – ROUND

FEATURES

2" aperture is unobtrusive in small scale spaces
Adjustable aim with 0° - 45° tilt and 360° rotation
Zero-flange trim options for modern ceiling
Etched degree markers and directional indicator make it simple to fine-tune the illumination angle
Beam angles ranging from 15º narrow to 35º wide for tailored performance
New construction mounting pan, IC-rated, or pan-less remodel kit available
Contemporary design provides glare-free illumination for a soft ceiling appearance
Choice of open reflector or die-cast flush, regressed or angled lensed trims to complement interior styles
Low UGR meets LEED and WELL requirements
Deliver scalable, data-driven smart buildings with PoE-enabled fixtures and controls
Support human-centric design with adaptive, individualized lighting using tunable white light
Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Tekniset tiedot

Housing	Die-cast aluminum spun and stamped articulating mechanism with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Mounting clips allow for ceiling thickness from 1/2″ – 13/16″.
Open Reflector	Low-iridescent anodized aluminum. Clear semi-specular finish standard.
Lensed Trim	Die-cast aluminum frame with micro-prismatic, acrylic lens. Diffuse acrylic lens standard with A Trim Type.
Electrical	High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70 > 44,000 hours. Reported L90 = 28,000 hours. Estimated L70 = 117,000 hours.
Mounting	Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. N and R mounting types for use in non-fire rated installations only. Minimum 17″ O.C. marked spacing required for L12 and L15 lumen packages when specified with R Mounting Type.
Listings	• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. • Suitable for wet location under covered ceiling when specified with WET/CC option. • IC-rated for direct contact with insulation when specified with I Mounting Type. • City of Chicago Environmental Air approved when specified with CP option. • Complies with ASTM-E283 when specified with ATH option. • RoHS compliant. • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.
Warranty	5-year limited warranty, see details

Tekniset tiedot

Yksilöity viite2ar-adjustabledownlight-round
TuoteperheIndoor Luminaires
TuoteryhmäDownlights
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2025-01-03
Painoksen numero1

Linkit

Tuotteen urlhttps://hew.com/products/2ar
Asennusohjeethttps://hew.com/instruction/2-inch-downlight_instructions.pdf
Tuotesertifiointihttps://hew.com/specifications/2AR_led.pdf

Liittyviä

Ensisijainen materiaaliMetalli
Toissijainen materiaaliLasi
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaValaistus - Kattoon kiinnitettävät
IFC-luokitusValaisin
Uniclass 2015 -koodiEF_70_80
Uniclass 2015 -kuvausLighting
CSI MasterFormat 2014 -koodi26 51 13
CSI MasterFormat 2014 -nimikeInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass-numero23-35 47 11
OmniClass-nimikeLighting Fixtures

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret