Julkaise tuotteesi
SunGuard® HP Neutral Plus 50 Double Glaze on Clear Glass (Asia Pacific)
SunGuard® HP Neutral Plus 50 Double Glaze on Clear Glass (Asia Pacific)

    SunGuard® HP Neutral Plus 50 Double Glaze on Clear Glass (Asia Pacific)

    Create your vision—with a view

    If you can imagine it, you can build it with SunGuard® HP Neutral Plus 50. This high performance, low-E glass allows architects the freedom to explore interior and exterior light. Typically, high transparency means high heat and ultraviolet light. With HP Neutral Plus 50, buildings minimise solar energy gain while allowing maximum visible light transmission for virtually any application. Design distinctive buildings with glass that offers structural integrity, uniformity, strength and optimum clarity.

    THICKNESS 3 - 12 mm   

    APPLICATIONS Facades Windows Doors Curtain Walls Roofs Skylights   

    MANUFACTURING OPTIONS Tempered Laminated Heat Soaked Heat Strengthened 

    GLASS SUBSTRATES Clear, Grey, Green  

    AVAILABLE SIZES Maximum Height x Width: 3210 x 6000 mm 

    RECOMMENDED COATING POSITIONS Double glazed: 2   

    EDGE DELETION Required: No   

    APPLICATION TYPE Can be used in: Insulating Glass Unit

    Tekniset tiedot
    • PRODUCT: SunGuard® HP Neutral Plus 50

      DOUBLE GLAZED PERFORMANCE VALUES:
       
      TRANSMITTANCE
      Visible Light: 48
      Ultraviolet: 21
      Solar Energy: 27
      Light to Solar Gain (LSG): 1.52
       
      REFLECTANCE
      Visible Light Outside: 26
      Visible Light Inside: 20
      Solar Energy Outside: 35
       
      U-VALUE
      Summer Daytime - Air (Btu/hr·ft²·F): 0.29
       
      HEAT GAIN
      Relative Heat Gain (RHG): 77
      Solar Heat Gain Coefficient (SHGC): 0.32
       
      COMPOSITION
      Composition: 6 mm / 12 mm / 6 mm - coating on surface #2
      Glass 1 & Coating: SunGuard HP Neutral Plus 50 on Clear
      Glass 2 & Coating: Clear
      Gap 1: 100% Air
      Calculation Standard: NFRC 2010


    Tekniset tiedot
    • Yksilöity viiteHP_NPlus50_DGUair_AP
    • TuoteperheSunGuard
    • TuoteryhmäSG Asia Pacific
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2020-07-11
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliLasi
    • Suunniteltu:Arabiemiirikunnat
    • Valmistettu:Arabiemiirikunnat
    Luokitus
    • BIMobject-luokkaRakennusmateriaalit - Glass & Glazing
    • IFC-luokitusIkkuna
    • ETIM-koodiEC003188
    • ETIM-nimiGlass
    • UNSPSC-nimiDoors and windows and glass
    • UNSPSC-koodi3017
    • Uniclass 2015 -koodiPr_25_71_33_35
    • Uniclass 2015 -kuvausGlass panels
    • CSI MasterFormat 2014 -koodi08 81 00
    • CSI MasterFormat 2014 -nimikeGlass Glazing
    • OmniClass-numero23-17 15 11
    • OmniClass-nimikeGlass Glazing
    • CSI UniFormat II -koodiB2020
    • CSI UniFormat II -nimikeExterior Windows

    Alueellinen saatavuus

    Aasia Oseania
    Armenia
    Amerikan Samoa
    Azerbaidžan
    Australia
    Bangladesh
    Cooksaaret
    Bhutan
    Fidzi
    Brittiläinen Intian valtameren alue
    Guam
    Brunei
    Kiribati
    Etelä-Korea
    Marshallsaaret
    Filippiinit
    Mikronesian liittovaltio
    Georgia
    Nauru
    Hong Kong
    Niue
    Indonesia
    Norfolkinsaari
    Japani
    Palau
    Joulusaari
    Papua-Uusi-Guinea
    Kambodža
    Pitcairnsaaret
    Kazakstan
    Pohjois-Mariaanit
    Kiina
    Ranskan Polynesia
    Kirgisia
    Salomonsaaret
    Kookossaaret
    Samoa
    Laos
    Timor-Leste
    Macao
    Tokelau
    Malediivit
    Tonga
    Malesia
    Tuvalu
    Mongolia
    United States Minor Outlying Islands
    Myanmar (Burma)
    Uusi-Kaledonia
    Nepal
    Uusi-Seelanti
    Pakistan
    Vanuatu
    Pohjois-Korea
    Wallis ja Futuna
    Singapore
    Sri Lanka
    Tadžikistan
    Taiwan
    Thaimaa
    Turkmenistan
    Uzbekistan
    Vietnam