Julkaise tuotteesi
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
    Geohidrol

    Geofor - Overlapping prefabricated bed joint reinforcement

    Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.
    Tekniset tiedot
    • Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.
    Tekniset tiedot
    • Yksilöity viitegeofor
    • TuoteperheBed Joint Reinforcement
    • TuoteryhmäGeofor
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2017-05-08
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliTeräs
    • Suunniteltu:Espanja
    • Valmistettu:Espanja
    Luokitus
    • BIMobject-luokkaRakennusmateriaalit - Vahvikkeet
    • IFC-luokitusVahvikeverkko
    • UNSPSC-nimiBricks
    • UNSPSC-koodi301316
    • Uniclass 2015 -koodiSs_25_13_50
    • Uniclass 2015 -kuvausMasonry wall systems
    • CSI MasterFormat 2014 -koodi04 05 19.26
    • CSI MasterFormat 2014 -nimikeMasonry Reinforcing Bars
    • OmniClass-numero23-13 21 21 11
    • OmniClass-nimikeMasonry Reinforcing
    • CSI UniFormat II -koodiB2010
    • CSI UniFormat II -nimikeExterior Walls

    Alueellinen saatavuus

    Eurooppa
    Ahvenanmaa
    Alankomaat
    Albania
    Andorra
    Belgia
    Bosnia ja Hertsegovina
    Bulgaria
    Espanja
    Färsaaret
    Gibraltar
    Guernsey
    Huippuvuoret
    Irlanti
    Islanti
    Italia
    Itävalta
    Jersey
    Kreikka
    Kroatia
    Kypros
    Latvia
    Liechtenstein
    Liettua
    Luxemburg
    Malta
    Mansaari
    Moldova
    Monaco
    Montenegro
    Norja
    Pohjois-Makedonia
    Portugali
    Puola
    Ranska
    Romania
    Ruotsi
    Saksa
    San Marino
    Serbia
    Slovakia
    Slovenia
    Suomi
    Sveitsi
    Tanska
    Tsekin tasavalta
    Ukraina
    Unkari
    Valko-Venäjä
    Vatikaanivaltio
    Venäjä
    Viro
    Yhdistynyt kuningaskunta