WPM 810 - Elastomeric, single component, polyurethane based cold liquid applied waterproofing membrane

WPM 810 is a single component; high performance polyurethane based cold applied elastomeric waterproofing membrane. WPM 810 exhibits high elasticity, excellent bond and low water permeability and makes it ideal for a wide range of waterproofing applications. The cured membrane forms an elastic, seamless, waterproof coating with good crack-bridging properties.

FEATURES
• Non Toxic: eco friendly coating
• Seamless cold-applied membrane: eliminates lapping, seaming, and pre-cutting
• Highly flexible: can accommodate movements and vibrations
• Root Resistant
• Outstanding barrier properties: ensures protection against corrosive soil conditions
• Thermally stable: irreversible chemical cure, eliminates melting and flow at high temperature
• Excellent adhesion to concrete substrates
• Excellent resistance to oxidation
• Good chemical resistance to most weak acids and alkali, water borne salts and sea water

Ardex Endura

Tekniset tiedot

Appearance: Viscous becomes black after drying
Viscosity: max. 75 poise
Drying time: 45 – 50 mins depending upon temperature or humidity
Specific gravity (IS 101/1964): 1.60 ± 0.1
Solid Content (IS 101/1964): 80 %
Elongation (ASTM D 412): >500 %
Crack Bridging: 2mm
Tensile Strength (ASTM D 412): 1 to 1.5 N/Sqmm
Water Vapour transmission for 1.33 mm film: 9.7 g/sqm/24 hrs
Water absorption: Nill at 1mm
Permeability (ASTM E 96): Passes test
Recovery after 100% Elongation (ASTM D 412): > 85%
Shore A hardness (ASTM D 2240): > 60
Flashpoint: 45 Deg C to 60 Deg C
Service Temperature: minus 10 Deg C to 45 Deg C
Coverage: Approximately 18 m² @ 1mm
Pack Size: 20 kg
Ardex Endura