Southwest Solutions GroupSeguir

Shelves and Drawers Museum Preservation Cabinet

Especificaciones

Especificaciones

• ShelvesShelves are constructed of 18-gauge steel, have a height of 1.250 inches and support a uniformly distributed load of 100 pounds. Shelves are installed using clips that allow for removal or adjustment of shelves without the use tools. Shelves available in full or half-width sizes. Nominal Shelf Dimensions

  • Width: 30 inch to 60 inch sections used to meet project requirements

  DoorsDoors are welded construction with a minimum 16-gauge cold rolled steel and reinforced to prevent binding, warping, racking, or twisting. All corner seams are mig-welded (fully filled) and ground smooth to provide aesthetically pleasing, sealed, and square corners. The doors and cabinet are designed to allow removal of all contents when the cabinet doors are opened at 90 degrees. BaseCabinet include an integrated base which houses leveling system and provisions required for stacking and bolting or anchoring of cabinet to a mobile carriage or stationary base. Forklift and caster bases are also available.Accessories

  • Casters
  • Glass Doors
  • Garment Rod

  Finishes Paint finish, low pressure laminate, high pressure laminate,acrylic finish, or non-off-gassing powder coated steel (standard).Sustainability

  • Up to 85% pre and post-consumer recycled content
  • Indoor Advantage Gold Certified for non-emissive materials and finishes (SCS IAQ)
  • Environmental Product Declarations (EPD) with more details about global warming potential, energy demand, and recycled content are available for select products upon request

Especificaciones técnicas

Especificaciones técnicas

• ReferenciaSSG_Cabinet_Museum_Preservation_Combo_PCS
• Familia de productoMuseum
• Grupo de productosPreservation, Flat File, Security
• TipoObjeto (objeto simple)
• Día de publicación2021-03-13
• Número de edición1

Links

Links

• Instalación URLhttps://fetchbim.com/product/509
• Descripción técnicahttps://app.fetchbim.com/Family/65b83f33-7eb9-4a9b-854a-60ebe34a60a4/File/PDF-SpecManual

Información relacionada

Información relacionada

• Material principalAcero recubierto de partículas

Clasificación

Clasificación

• Categoría BIMobjectMobiliario y decoración - Estanterías, almacenaje
• Clasificación IFC Muebles
• CSI MasterFormat 2014 Code10 51 13
• CSI MasterFormat 2014 TítuloMetal Lockers
• Número OmniClass23-21 11 11
• Título OmniClass Commercial Storage Units
• CSI UniFormat II CódigoE20
• CSI UniFormat II TítuloFURNISHINGS