Archivados

SLR-12-0 Standing Seam Roof Panel System

With a wide selection of design options and superior strength capabilities, the SLR Series provides versatile architectural solutions for any project. SLR panels are standing seam roofing panels that can transition to wall. The 2" high seam may be mechanically seamed at 90 or 180 degrees at slopes as low as 1/2: 12 for the latter. Onsite roll-forming is available. Contact Morin for custom design options and capabilities for SLR.

Product Highlights

Onsite roll-forming of panels in continuous lengths is available to eliminate panel end laps
Watertight seam from eave to ridge for slopes as low as 1/2: 12 (for 180 degree seam)
Design option to transition from wall to roof
Curving capability down to 20' radius
Clip relief design to allow thermal expansion and contraction
Available in aluminum, galvalume, stainless steel, zinc, and copper
Standard and custom finish options available
ASTM, UL and FM approvals

Especificaciones

Panel Attachment
Standing seam concealed sliding or fixed clip, mechanically seamed
Panel Dimensions
Width: 12" nominal
Height: 2" nominal
Standard Lengths: 5'-40' (shorter and longer lengths available)

Color and Finish Options
Full range of Morin standard colors as well as custom color options are available. Finish on one side or both sides.
Environmental
LEED Certified and EPD available for all products. View the EPD and LEED letter on our Certifications page.

Especificaciones técnicas

Referenciaslr-12-0-roof-panel-system
Familia de productoRoof Systems
Grupo de productosSLR Series
TipoObjeto (objeto simple)
Día de publicación2023-09-07
Número de edición1

Links

Instalación URLhttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/
Instrucciones de instalaciónhttps://www.morincorp.com/content/dam/morin/products/slr/slr-installation-guide.pdf
Certificación de productohttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/?s=d
Descripción técnicahttps://www.morincorp.com/content/dam/morin/products/slr/morin-slr-slr-12-0-cr-r100-productdatasheet.pdf

Información relacionada

Material principalMetal
Diseñado enEstados Unidos
Fabricado enEstados Unidos

Clasificación

Categoría BIMobjectConstrucción - Cubiertas
Clasificación IFC Tejado
ETIM CodeEG019610
ETIM NameRoofing materials
Código Uniclass 2015Pr_25_71_14
Descripción Uniclass 2015Cladding and lining panels (Lightweight cladding and roofing panels)
CSI MasterFormat 2014 Code07 41 13
CSI MasterFormat 2014 TítuloMetal Roof Panels
Número OmniClass23-13 39 11 11
Título OmniClass Exterior Metal Roof Panels