Meyer Sound

Ashby Ceiling Loudspeakers

Traducido por Google,

La configuración concéntrica de dos controladores de Ashby ofrece precisión y fidelidad en un rango completo: experiméntelo todo, desde un discurso nítido hasta los agudos brillantes y los bajos ricos de la música.

características y beneficios

autoalimentado
Fácil de instalar
Cobertura extremadamente amplia y uniforme
Distorsión ultrabaja
Relación SPL-tamaño excepcional
Hermosa respuesta de baja frecuencia y reproducción de voz y música.
Admite tramos de cable largos con cables de calibre ligero Un MPS-488HP puede alimentar hasta 16 Ashby-8C

Aplicaciones

Sistemas distribuidos para música y megafonía que exigen inteligibilidad vocal y de audio de alta calidad
Sistemas acústicos de constelaciones

Especificaciones

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Especificaciones técnicas

Referenciameyersound-ashby
Familia de productoLoudspeakers
Grupo de productosULTRA
TipoObjeto (objeto simple)
Día de publicación2020-03-12
Número de edición2

Links

Instalación URLhttps://meyersound.com/product/ashby/
Instrucciones de instalaciónhttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Certificación de productohttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Descripción técnicahttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Información relacionada

Material principalAluminio
Diseñado enEstados Unidos
Fabricado enEstados Unidos

Clasificación

Categoría BIMobjectElectrónica - Audio
Clasificación IFC Objeto
Código Uniclass 2015Pr_70_75_36_50
Descripción Uniclass 2015Loudspeakers
CSI MasterFormat 2014 Code27 24 23
CSI MasterFormat 2014 TítuloAudio-Video Devices
Número OmniClass23-37 15 29 11 13
Título OmniClass Loudspeakers

Disponibilidad en regiones

Europa	Asia	Norteamérica	África	Sudamerica	Oceanía
Åland	Afganistán	Anguilla	Angola	Argentina	Australia
Albania	Arabia Saudí	Antigua y Barbuda	Argelia	Bolivia	Estados Federados de Micronesia
Alemania	Armenia	Aruba	Benín	Brasil	Fiyi
Andorra	Azerbaiyán	Bahamas	Botsuana	Chile	Guam
Austria	Bangladesh	Barbados	Burkina Faso	Colombia	Isla Norfolk
Bélgica	Baréin	Belice	Burundi	Ecuador	Islas Cook
Bielorrusia	Brunéi	Bermudas	Cabo Verde	Guayana Francesa	Islas Marianas del Norte
Bosnia-Herzegovina	Bután	Canadá	Camerún	Guyana	Islas Marshall
Bulgaria	Camboya	Caribe Neerlandés	Chad	Islas Malvinas (Falkland Islands)	Islas Pitcairn
Chipre	Catar	Costa Rica	Comoras	Paraguay	Islas Salomón
Ciudad del Vaticano	China	Cuba	Congo	Perú	Islas Ultramarinas Menores de Estados Unidos
Croacia	Corea del Norte	Curazao	Costa de Marfil	Surinam	Kiribati
Dinamarca	Corea del Sur	Dominica	Djibuti	Uruguay	Nauru
Eslovaquia	Emiratos Árabes Unidos	El Salvador	Egipto	Venezuela	Niue
Eslovenia	Filipinas	Estados Unidos	Eritrea		Nueva Caledonia
España	Georgia	Granada	Esuatini		Nueva Zelanda
Estonia	Hong Kong	Groenlandia	Etiopía		Palaos
Finlandia	India	Guadalupe	Gabón		Papúa Nueva Guinea
Francia	Indonesia	Guatemala	Gambia		Polinesia Francesa
Gibraltar	Isla de Navidad	Haití	Ghana		Samoa
Grecia	Islas Cocos (Keeling)	Honduras	Guinea		Samoa Americana
Guernsey	Israel	Islas Caimán	Guinea Ecuatorial		Timor Oriental
Hungría	Japón	Islas Turcas y Caicos	Guinea-Bissau		Tokelau
Irlanda	Jordania	Islas Vírgenes Británicas	Kenia		Tonga
Isla de Man	Kazajistán	Islas Vírgenes de los Estados Unidos	Lesoto		Tuvalu
Islandia	Kirguistán	Jamaica	Liberia		Vanuatu
Islas Faroe	Kuwait	Martinica	Libia		Wallis eta Futuna
Italia	Laos	México	Madagascar
Jersey	Líbano	Montserrat	Malaui
Letonia	Macao	Nicaragua	Malí
Liechtenstein	Malasia	Panamá	Marruecos
Lituania	Maldivas	Puerto Rico	Mauricio
Luxemburgo	Mongolia	República Dominicana	Mauritania
Macedonia del Norte	Myanmar (Birmania)	Saint Barthélemy	Mayotte
Malta	Nepal	San Cristóbal y Nieves	Mozambique
Moldavia	Omán	San Martín	Namibia
Mónaco	Pakistán	San Pedro y Miquelón	Níger
Montenegro	Palestina	San Vicente y las Granadinas	Nigeria
Noruega	Singapur	Santa Lucía	República Centroafricana
Países Bajos	Siria	Sint Maarten	República Democrática del Congo
Polonia	Sri Lanka	Trinidad y Tobago	Reunión
Portugal	Tailandia		Ruanda
Reino Unido	Taiwán		Sahara Occidental
República Checa	Tayikistán		Santa Elena
Rumanía	Territorio Británico del Océano Índico		Santo Tomé y Príncipe
Rusia	Turkmenistán		Senegal
San Marino	Turquía		Seychelles
Serbia	Uzbekistán		Sierra Leona
Suecia	Vietnam		Somalia
Suiza	Yemen		Sudáfrica
Svalbard y Jan Mayen			Sudán
Ucrania			Sudán del Sur
			Tanzania
			Togo
			Túnez
			Uganda
			Zambia
			Zimbabue