EVOPLUS SMALL

Traducido por Google,

Circulador electrónico de rotor húmedo de bajo consumo de energía, adecuado para sistemas comerciales de calefacción y aire acondicionado. Rango de funcionamiento: de 2 a 12 m3/h con altura de hasta 11 metros. Modo de funcionamiento: presión proporcional, presión constante, velocidad constante. Motor síncrono y tecnología inverter incorporada. Longitud de puerto a puerto: 180-220-250 mm. Rosca de conexión: DN 25 (acoplamientos de bomba 1 1/2")- DN 32 (acoplamientos de bomba 2"). Brida de conexión: DN32-40. Presión de trabajo: 16 bar (1600 kPa).

Especificaciones

Enbloc circulator composed of cast iron hydraulic section and wet rotor synchronous motor. Motor casing in aluminium. Scroll type pump body featuring high hydraulic efficiency thanks to highly precise design and smooth internal surfaces. In-line suction and discharge ports. The single version is supplied as standard with insulating covers to avoid heat loss and/or the formation of condensate on the pump body. EVOPLUS circulators for small community systems are connected to the power supply line by means of a convenient connector with relative plug supplied as standard that makes the operation simple and fast. Impeller in technopolymer, motor shaft in alumina held in graphite bearings lubricated by the pumping medium. Rotor protective jacket in stainless steel. Ceramic thrust ring, ethylene propylene seals and stator jacket in carbon fiber composite. Permanent magnet synchronous motor. The twin version features an automatic swing check valve incorporated in the discharge port to avoid water recirculating through the unit when it is not running; moreover, a blank flange is supplied as standard to allow either of the two motors to be removed for servicing. Standard execution of the pump body is PN 16; the flanged version features 4 slots compatible with PN 6 / PN 10 / PN 16 counter-flanges for interchangeability of pumps in existing systems. Circulator protection rate: IP 44 Insulation Class: F Standard voltage: single-phase 220/240 V, 50/60H This product complies with European standards EN 61800-3 – EN 60335-1 – EN 60335-2-51 TECHNICAL DATA Operating range: 2 to 12 m³/h with head up to 11 meters Liquid temperature range: from -10 °C to +110 °C. Pumped liquid: clean, free of solid contaminants and mineral oils, non-viscous, chemically neutral, close to the properties of water. (max. glycol contents 30%) Maximum working pressure: 16 bars (1600 kPa) Standard flanging: DN 32, DN 40 PN 6 / PN 10 / PN 16 (4 slots) Maximum ambient temperature: +40°C Minimum suction pressure: the values are given in the relevant tables. Accessories: 1/2"F, 3/4"F, 1"F, 1"1/4F, 1"1/4M unions, DN 32 PN 6 and DN 40 PN 10 threaded counter flanges. Electromagnetic compatibility: EVOPLUS circulators comply with standard EN 61800-3, in category C2,in terms of electromagnetic compatibility. Electromagnetic emissions: Residential environment (containment measures may be necessary in certain cases). Conducted emissions: Residential environment (containment measures may be necessary in certain cases).

Especificaciones técnicas

ReferenciaEVOPLUS-SMALL
Familia de productoCirculators
Grupo de productosWet Rotor Electronic Circulators
TipoObjeto (objeto simple)
Día de publicación2019-03-19
Número de edición1
Altura (mm)204
Ancho (mm)124
Profundidad (mm)224

Links

Instalación URLhttps://www.dabpumps.es/es/node/1323
Instrucciones de instalaciónhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60151285.pdf
Descripción técnicahttps://www.dabpumps.es/sites/dabpumps.es/files/2018-11/EVOPLUS%20SMALL%20-%20Ficha%20T%C3%A9cnica.pdf

Información relacionada

Material principalHierro fundido
Material secundarioPlastico
Diseñado enItalia
Fabricado enItalia

Clasificación

Categoría BIMobjectFontanería - Bombas
ETIM CodeEC010980
ETIM NameBuilt-in circulation pump
Código Uniclass 2015Pr_65_53
Descripción Uniclass 2015Pump products
CSI MasterFormat 2014 Code22 35 23
CSI MasterFormat 2014 TítuloCirculating, Domestic Water Heat Exchangers
Número OmniClass23-27 17 00
Título OmniClass Pumps

Disponibilidad en regiones

Europa
Åland
Albania
Alemania
Andorra
Austria
Bélgica
Bielorrusia
Bosnia-Herzegovina
Bulgaria
Chipre
Ciudad del Vaticano
Croacia
Dinamarca
Eslovaquia
Eslovenia
España
Estonia
Finlandia
Francia
Gibraltar
Grecia
Guernsey
Hungría
Irlanda
Isla de Man
Islandia
Islas Faroe
Italia
Jersey
Letonia
Liechtenstein
Lituania
Luxemburgo
Macedonia del Norte
Malta
Moldavia
Mónaco
Montenegro
Noruega
Países Bajos
Polonia
Portugal
Reino Unido
República Checa
Rumanía
Rusia
San Marino
Serbia
Suecia
Suiza
Svalbard y Jan Mayen
Ucrania