Objetos BIM - ¡Descarga gratis! LockMaster S1

LockMaster S1

Traducido por Google,

Las puertas batientes CLD LockMaster S1 se han desarrollado especialmente para integrarse perfectamente con una cerca CLD. Disponibles en diferentes opciones de malla Dulok S1 y Dulok 25 S1, Securus S1 y Ultimate Extra S1, ofrecen control de acceso con clasificación de seguridad, manteniendo la estética. Rigurosamente probado por la Junta de Certificación de Prevención de Pérdidas (LPCB) para garantizar un retraso mínimo de 60 segundos contra un ataque, LockMaster S1 también cuenta con la acreditación Secured by Design, lo que lo convierte en una especificación de seguridad preferida por la policía.

Características:

Sistema especializado de alta seguridad para retener un retraso mínimo de 60 segundos.
Materiales reciclados
Colgado trasero o central
Disponible en tipos de malla S1 para adaptarse a la cerca
Opciones de una o dos hojas

Especificaciones

Standard: LPS 1175 A1 (SR1) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Secured by Design - Police Preferred Specification
Product Reference: CLD LockMaster S1 Gate System
Description: Open mesh steel high security gate system with mesh infill, to match fencing
Configuration: Double leaf/ single leaf / rear hung or centre hung as required
Heights: 1830mm to 3030mm to match fence panel
Select as required
Nominal heights: 1.8m to 3m
Widths: To suit mesh infill panels:
Select as required Single leaf: 500mm minimum to 3000mm maximum
Double leaf: 1000mm to 8000mm maximum
Gate Frame: To suit mesh infill panels:
Vertical stiles: minimum of 50mm x 50mm x 2mm square hollow section
Horizontal rails: minimum of 40mm x 40mm x 2mm square hollow section
Galvanised and powder-coated to match fencing
Infill Panels: Options to be chosen from the following fencing systems (see fencing Q40 specification sheets for information)
CLD Securus S1
CLD Dulok S1
CLD Dulok 25 S1
CLD Ultimate Extra S1
Locking: Slide bar with certified padlock
Hinges: 3 x CLD hinge sets with M20 eye bolts
Panel Fixings: 41 x 21mm channel with SafeTFix to rear
Finish: Polyester powder-coated to minimum 80 microns.
Any RAL colour
Post dimensions: 80mm x 80mm minimum
Foundations: Set posts in holes 450mm square x 950mm deep min. Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
To be read in conjunction with Preliminaries/General conditions