Termosolaio

Traducido por Google,

El Termosolaio es un panel de encofrado para crear losas de vigas de hormigón armado coladas en lugar de entrepisos, cubiertas o cimientos. Los paneles son totalmente de poliestireno expandido y tienen un ancho estándar de 60 cm. Los paneles tienen un rebaje central para la formación de la viga de apoyo en hormigón armado. y un fondo aislante (bajo la vigueta) de espesor variable de 4 cm a 8 cm que une los dos aligeramientos de EPS. Cada panel lleva incorporadas en su interior 2 cerchas metálicas "tipo pittini" que lo hacen autoportante en una primera fase hasta 2,00 metros y dos perfiles en "C" de 30 cm de distancia para el anclaje del revestimiento de cartón yeso.

Especificaciones

Construction of a flat or inclined floor, consisting of prefabricated formwork panels with a width of 60cm, variable length, totally in self-extinguishing expanded polystyrene, with a density of not less than 18Kg / m3, suitably shaped with a central recess (joist with variable EPS bottom from 4.0cm to 8.0cm) ready to receive the pouring of concrete (resistance class Rck 30N / mm2 and consistency S4 or as required by the report of reinforced concrete structure) to create a floor with beams in reinforced concrete cast on site for an accidental overload of 200 kg / m² and a permanent load of 200 kg / m² (unless otherwise specified for load), in addition to the floor's own weight. The panels can be accessorised with two trusses that give self-supporting capacity in the first phase up to 2.00m and two "C" profiles placed at 1.0cm from the formwork bottom and 30cm pitch, for the preparation of the final finish on the intrados with plasterboard sheets. Special slots in the bottom identify its positioning. A steel spacer placed inside the joist allows positioning at the correct distance from the bottom.

Especificaciones técnicas