Name: Fixed Industrial Stairs
Rating: 4.3 (21 reviews)

Fixed Industrial Stairs

4.3(21 reviews)

This stair solves:

Fixed Industrial Stairs for rooftop access, pit access, mezzanine access, or crossover obstacles
Four types of Industrial Stairs: walk-thru, to roof hatch access, to a platform, or crossover with a platform in the middle
Users can face the direction of travel for ascent or descent
Users can carry objects upon ascent or descent

Reduce Costs and Increase Quality

Reduce maintenance costs by using an aluminum stair which is naturally corrosion resistant with minimal ongoing maintenance or upkeep compared to steel stairs that corrode over time. Reduce installation costs by using an aluminum stair which is a third the weight of steel, so it is easier to install, requiring less equipment. Aluminum is high strength and is used in planes, cars, trucks, buses, trains, and buildings.

Reduce Risks

With over 75 years of experience providing access solutions, we know the codes and are experts in this area. Units are built to meet or exceed OSHA 1910 Subpart D design criteria. Without the correct stair, there could be injury, liability, and loss of money, which puts companies' reputations and lives at stake.

Aesthetically Pleasing and Sustainable Material

The standard aluminum mill finish will not rust or stain the surrounding structure. Powder Coating is available to match the surroundings or stand out for safety. In addition, aluminum is 100 percent recyclable and retains its properties indefinitely.

Key Details of Stair

Fully welded construction used throughout
8" x 2.29" x 1/4" aluminum structural channel stringers
Treads are bar grating (standard) both welded and bolted to the stringer
Treads tested to withstand over 3000-pound loading per tread
Stair Rail System with handrail (handrail/guardrail combo) are two-line, 1-1/4" Sch 40 Aluminum Pipe
30 to 45-degree pitch
Treads widths up to 55-1/2" (clear tread)
5 Year Warranty

Specification

SECTION 05 51 16 or 05 51 19
FIXED ALUMINUM INDUSTRIAL STAIR
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Fixed Aluminum Industrial Stairs.
1.2 RELATED SECTIONS
A. Section 05 12 00 - Structural Steel Framing: Roof structure and opening support.
B. Section 05 50 00 - Metal Fabrications: Miscellaneous metal supports.
C. Section 06 10 00 - Rough Carpentry: Roof framing and opening support.
D. Section 07 42 00 - Wall Panels: Roof curb flashing.
1.3 REFERENCES
A. OSHA 1910.25: Stairways.
1.4 SUBMITTALS
A. Submit under provisions of Section 01 30 00.
B. Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
C. Shop Drawings for Stairs:
1. Plan and section of stair installation.
1.5 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store stair until installation inside under cover. If stored outside, under a tarp or suitable cover.
1.6 WARRANTY
A. Limited Warranty: Five years against defective material and workmanship, covering parts only, no labor or freight. Defective parts, if deemed so by the manufacturer, will be replaced at no charge, freight excluded, upon inspection at manufacturer's plant which warrants same.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Precision Ladders, LLC, which is located at: P. O. Box 2279; Morristown, TN 37816-2279; Toll Free Tel: 800-225-7814; Tel: 423-586-2265; Fax: 423-586-2091; Web: www.PrecisionLadders.com
B. Substitution requests will be considered in accordance with provisions of Section 01 60 00.
2.2 FIXED ALUMINUM INDUSTRIAL STAIR
A. Fixed Aluminum Industrial Stair and Components: Stair, mounting brackets and guardrail/handrails on both sides.
1. Model: PS-** (** = height in vertical inches) Fixed Aluminum Industrial Stair as manufactured by Precision Ladders, LLC.
2. Capacity: Unit shall support a 1,000 lb (454 kg) total load without failure.
3. Degree of Incline: 30 to 45 degrees. Stairs have uniform riser heights and tread depths between landings. Not all degrees are available for every height.
4. Performance Standard: Units designed and manufactured to meet or exceed OSHA 1910.25.
B. Components:
1. Stair Stringer: 8 inch by 2.29 inch by 1/4 inch (203 mm by 58 mm by 6 mm) extruded 6005-T5 structural aluminum channel.
2. Stair Treads: Aluminum (6005-T5) bar grating treads. Treads to be both welded and bolted to stringer with 3/8 inch round stainless steel hex bolts. (Tread depth determined by rise & run.)
3. Stair Mounting Brackets:
a. Floor Brackets: 4 inch by 4 inch by 1/4 inch (102 mm by 102 mm by 6 mm) aluminum angle.
b. Top Bracket: 4 inch to 6 inch tall by 2 inch mounting flange by 1/4 inch thick by 6 inch by 10 inch long aluminum angle. (Top mounting bracket size is determined by stair’s rise & run.)
4. Handrails: 1-1/4 inch Schedule 40 aluminum pipe (6005-T5) providing a 1.6 inch OD. Internal aluminum fittings. Welds will be raised but smooth.
5. Platform:
a. Surface: Aluminum (6005-T5) bar grating treads.
b. Toe Boards: 4 inch by 1/4” 6005 T-5 aluminum.
c. Handrails: 1-1/4 inch Schedule 40 aluminum pipe (6005-T5) providing a 1.6 inch OD.
6. Finishes:
a. Standard: Mill finish on aluminum stair components.
b. Optional Finish: Powder Coated
C. Options
1. Tread material: aluminum (6005-T5) formed anti-slip plate.
2. Crossover stairs with platform between two stairs.
2.3 FABRICATION
A. Completely fabricate stair ready for installation before shipment to the site.
PART 3 EXECUTION
3.1 EXAMINATION
A. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
B. Examine materials upon arrival at site. Notify the carrier and manufacturer of any damage.
3.2 INSTALLATION
A. Install in accordance with approved submittals.
3.3 PROTECTION
A. Protect installed products until completion of project.
B. Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION

Technical specification

Unique ref.fixed-industrial-stairs
Product familyStairs
Product groupFixed Industrial
TypeObject (single object)
Date of publishing2021-08-26
Edition number1

Links

Product urlhttps://precisionladders.com/products/fixed-industrial-stairs/
Instruction videohttps://youtu.be/AqHNxzmeG4w
Product certificationhttps://app.box.com/s/082k4k263sa3iob4celoqbq8pmzkwfts

Material mainAluminium
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryConstruction - Stairs
IFC classificationStair
Uniclass 2015 CodeEF_35_10
Uniclass 2015 DescriptionStairs
OmniClass Number23-17 23 17
OmniClass TitleStairs
CSI UniFormat II CodeC2010
CSI UniFormat II TitleStair Construction

North America

Anguilla

Antigua and Barbuda

Aruba

Barbados

Belize

Bermuda

British Virgin Islands

Canada

Caribbean Netherlands

Cayman Islands

Collectivity of Saint Martin

Costa Rica

Cuba

Curaçao

Dominica

Dominican Republic

El Salvador

Greenland

Grenada

Guadeloupe

Guatemala

Haiti

Honduras

Jamaica

Martinique

Mexico

Montserrat

Nicaragua

Panama

Puerto Rico

Saint Kitts and Nevis

Saint Lucia

Saint Pierre and Miquelon

Saint Vincent and the Grenadines

Saint-Barthélemy

Sint Maarten

The Bahamas

Trinidad and Tobago

Turks and Caicos Islands

U.S. Virgin Islands

United States

Fixed Industrial Stairs

Similar products

For Manufacturers

About

Legal