GRAFT FR Damper

GRAFT FR Damper is used to fire proof ventilation ducts which penetrate fire rated constructions such as fire compartments and fire walls; preventing the passage of fire and smoke (surrounding and inside the ventilation duct).

The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire. The aperture surrounding the dampers are fire sealed with GRAFT fire stopping products.

The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed.

The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.

Available in the following sizes: Ø63, Ø80, Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400, Ø500, Ø630, Ø800, Ø1000, Ø1250

Specification

- Maintenance-free and no electrical connections necessary.
- The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
- An aperture can include several dampers and in addition, technical services such as cables, cable trays and pipes.
- The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
- Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
- Keeps the temperature in the duct network lower than 120°C, protecting fans and sensitive units in the system.
- Insulation of ducts is not necessary.
- Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
- The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to easily fit the dampers.
- The dampers are attached to the inside of the ducts, giving the benefit of space-saving.
- The dampers are only 15 cm long and bends can be connected right behind the fire seal (also available to order in other sizes).
- The damper can be attached to a vent on one side.

Technical specification

Unique ref.GRAFT_FR_Damper
Product familyGRAFT
Product groupFR Damper
TypeObject (single object)
Date of publishing2020-03-17
Edition number1
Depth (mm)150

Links

Product urlhttps://www.graft.no/produkter/fr-brannspjeld/
Installation instructionshttps://www.graft.no/wp-content/uploads/2020/06/FR-Brannspjeld-Montasjeanvisning.pdf
Technical descriptionhttps://www.graft.no/wp-content/uploads/2020/06/FR-Brannspjeld-Teknisk-datablad-1.pdf

Material mainGalvanized steel
Designed inUnited Kingdom
Manufactured inUnited Kingdom

Classification

BIMobject CategoryFire Products - Fire Stops
IFC classificationObject

Region availability

Europe
Åland Islands
Albania
Andorra
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Faroe Islands
Finland
France
Germany
Gibraltar
Greece
Guernsey
Hungary
Iceland
Ireland
Isle of Man
Italy
Jersey
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Moldova
Monaco
Montenegro
Netherlands
North Macedonia
Norway
Poland
Portugal
Romania
Russia
San Marino
Serbia
Slovakia
Slovenia
Spain
Svalbard and Jan Mayen
Sweden
Switzerland
Ukraine
United Kingdom
Vatican City