Neva 7 - Outside Lighting

linear profile for outdoor applications
walkover
surface mounted (ceiling, wall, loor) with brackets or recessed (ceiling, floor, wall) with outer casing
Power: 30W
Power supply: 24Vdc
Lumen output at source: 1699 lm, R: 273 lm, G: 600 lm, B: 184 lm, W: 642 lm (4000K)
Delivered lumen output: 1051 lm, R: 169 lm G: 371 lm B: 114 lm W: 397 lm (4000K, 32°)
6 LED RGBW groups pitch 120 mm, 50000h L90 B10  (Ta 25°C)
LED colour: RGBW
Optics: 18°, 32°, 44°, 78°, 26°x58°: optical system composed of a series of light sources equally spaced at 120 mm from each other. The deep-set TIR lens guarantees high-quality light emission and visual comfort
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized grey (20 micron) to give the product better heat dissipation and increase its resistance to corrosion. Caps made of glass-fibre-reinforced polyamide for greater resistance.
Screen material: 4-mm-thick tempered glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches
power supply unit not included
includes 1,5 m FEP+RUB cable (equivalent to H05RN-F cable) 6x0,50/0,50 Ø6,3 mm
Ingress protection: IP67
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: -20°C — +45°C
Maximum device temperature: 60°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: 1250 g
Dimensions: 677x37x29 mm
Energy efficiency class: A / A+ / A++
Accessories: WB6520 Anti-glare shield in black-painted stainless steel - 673 mm, WC6520 Aluminium outer casing - 682 mm, WC6720 Aluminium outer casing for plasterboard - 682 mm, WM0601 Pair of brackets h 75 mm, WM0602 Pair of brackets h 140 mm, WN6001 Anti-fall kit, WN6005 Alignment kit for outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption