System features:
- Super fast 5 days shorter application time vs conventional system
- Light weight - up to 50% lighter per m² vs conventional system
- Convenient - less material, less application steps
- Highest efficiency per m²
- Extended application conditions from 0°C to 40°C for eps boards fixing
- Low water uptake and high vopour permeability
- Resistant to biological contamination like fungi and algae
- Highly durable and flexible
- Excellent application
- Colors: NCS, RAL, Color of nature
Approvals:
ETA 08/0308 of 30/06/2023
System components:
1. Fixing: Ceresit CT 84 Express PU-Adhesive for EPS-boards, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations.
2. Insulation material: EPS-boards classified as EN 13163, with thickness up to 42 cm.
3. Reinforced layer*: Ceresit CT 87 White Flexible Adhesive and reinforcing mortar for EPS and MW and Ceresit CT 325 glass fibre mesh.
4. Plaster**: Ceresit CT 174, CT 175 Silicate-Silicone Aquastatic, silicate-silicone plaster.
* Optionally you can use as rendering mortars CT 85, CT 82/ZU covered by ETA documents ETA Ceresit Ceretherm Classic and ETA Ceresit Ceretherm Popular; in this case priming paint CT 16/CT 15 is necessary.
** Alternative Ceresit plasters and paints: Mineral, Acrylic, Silicone, Silicate, Elastomeric.
3.5 
