ARDEX S 1 K - One-Component Waterproofing and Crack Isolation Membrane

ARDEX S 1 K - One-Component Waterproofing and Crack Isolation Membrane

ARDEX S 1-K™ One-Component Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile installations. It also provides an excellent bonding layer for ARDEX tile and stone setting materials. ARDEX S 1-K can also be used for crack isolation up to 1/8″ (3 mm)*.

Key Features

Flexible, topside waterproofing for interior floors and walls
Very easy-to-apply, 2-coat system; paint roller or brush
Easy to install with a paint roller or brush
Use for bathrooms, showers and other wet areas prior to the installation of tile
Highly workable consistency; minimal drips and splatters
Crack isolation up to 1/8″ (3 mm)
Bonds to a wide range of substrates

Standards

SystemOne™
Meets or exceeds ANSI A118.10
Meets or exceeds ANSI A118.12
IAPMO

Specification

Installation
Mixing Ratio: Single-component mix. Do not dilute or mix with additives.
Approx. Coverage:
195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall
56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall *
Coverage will vary with substrate surface profile, porosity and texture.
Performance
Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours
Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).
VOC: < 1 g/L, calculated SCAQMD Methods
Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months
Warranty: ARDEX L.P. Standard Limited Warranty applies.

Technical specification

Unique ref.ARDEX-S-1-K
Product familyTile & Stone Installation System
Product groupWaterproof Coating for Masonry Surfaces
TypeObject (single object)
Date of publishing2019-11-07
Edition number1

Links

Product urlhttps://www.ardexamericas.com/product/ardex-s-1-k/
Instruction videohttps://youtu.be/ASkTAl-e89k
Technical descriptionhttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-S-1-K-Technical-Data.pdf

Material mainSealant
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryFlooring - Floor Tiles
IFC classificationWall
CSI MasterFormat 2014 Code09 97 26
CSI MasterFormat 2014 TitleCementitious Coatings
OmniClass Number23-15 21 00
OmniClass TitleSurface Applied Coatings
CSI UniFormat II CodeC3010
CSI UniFormat II TitleWall Finishes

Region availability

North America	Europe
Anguilla	Austria
Antigua and Barbuda	Czech Republic
Aruba	Denmark
Barbados	France
Belize	Italy
Bermuda	Poland
British Virgin Islands	Russia
Canada	Sweden
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States