Refrigerated Stainless Steel Evidence Locker

Stainless Steel Evidence Locker Refrigerated

These are full-sized stainless steel refrigerated evidence lockers at 36" x 24" x 82".

Standard sizes
Widths: 36"
Depths: 24"
Heights: 82"

Full size refrigerated evidence lockers at 36" x 24" x 82"
One size
Two column -- 4, 6, 8, 10, 12 door units (all internal, no model change)
Three column -- 9, 15, 18, 24 door units (all internal, no model change)

These evidence lockers come with a variety of configurations and options, such as pass-thru or non-pass-thru. They are used by law enforcement professionals in public safety departments. To use this family, open the fetch app, then click on the model to insert it into your project. In the properties browser, under construction, you can choose between pass-through and non-pass-through locker styles. Some configurations can add a refrigerated door in the bottom right corner. This model lets you choose from the 19 configurations in the types tab.Each kit comes with various options with a unique price attached to them. A typical solution would be a run of lockers in a linear direction. Lockers

Lockers come in either Pass-thru or Non Pass-thru
Each model comes with a variety of compartments and sizes with self-closing doors
Push-button locks on the front of each door
For Pass-thru lockers, a single hinged rear door provides access and cannot be accessed from the front
Rear door comes with a different master key for evidence retrieval
No keys required for evidence drop off
Units come shipped fully assembled
Pre-drilled mounting holes in base and sides of locker
Number tags w/ instructions are installed on all front doors
Base comes with adjustable floor levelers
High quality Powder coat paint
Standard trim and installation hardware comes with each locker
Lifetime warranty
One-year limited warranty on all refrigeration units
Mesh rear doors available
Lockers are typically 36" Wide x 82" Tall and 24" Deep w/ base. Some lockers come 24" Wide
Optional front lockout system

Small Evidence Refrigerator

Stainless steel throughout
Keyless locking system prevents re-access
Available in Pass-thru and Non Pass-thru
Four standard configurations

Specification

Sustainability
- Contain an average of 75% recycled steel
- Can be reconfigured and reused in order to prevent disposal
- All products meet the indoor advantage gold certification
- All excess materials used in the construction process are recycled
Locker
- High quality powder coat paint
- Some configurations allow for refrigerated compartments
- Lockers are typically 36" Wide x 82" Tall and 24" Deep. Some lockers come 24", 18", or 12" Wide
- Available in Pass-thru and Non-Pass-thru
- Weights and pricing are available
Frame
- Structurally welded frame constructed of 18 gauge steel
- Horizontal and vertical flanges will overlap a min. of 1.5" and have a min. of 2 resistance welds per corner
- Center vertical lock housing is structural runs the full height and depth of the locker
Bases
- Each base shall be permanently affixed to each locker
- Each base is constructed of 14 gauge steel
- Four floor-levelers come with each base
Locks
- Stainless steel push button lock built of one piece removable design
- Locks will secure the door with a single push of the button
- Locks come pre-lubricated with no maintenance for the lifetime of the unit
- Locks are tested to complete a min. 40,000 cycles without failure
One Piece Doors
- Each door is constructed of two pieces of 18 gauge steel
- Each door has a nickel plated, flush mounted door handle
- Neoprene silencers
- Anti-pry tabs that engage with the Center Vertical lock
- Spring loaded hinges welded to prevent pin removal
Refrigerators:
- Has magnetic seals on outer door
- Has circulation fans that maintain a consistent temperature throughout the interior of the fridge
- Digital controls with settings set to maintain 38 to 42 Fahrenheit
- Has an audible alarm
- Condensation-free door jam
- Defrost cycle twice a day
- 134A refrigerant
- Powered by 115V/15 amp
- CUL and UL Certified
- One year warranty on refrigeration unit and a lifetime warranty on frame
Sustainability
- Up to 85% pre and post-consumer recycled content
- Indoor Advantage Gold Certified for non-emissive materials and finishes (SCS IAQ)
- Environmental Product Declarations (EPD) with more details about global warming potential, energy demand, and recycled content are available for select products upon request

Technical specification

Unique ref.SSG_Locker_Evidence_Refrigerated_SST
Product familyPublic Safety
Product groupWeapon Storage, Lockers, Workstations, Mobile Shelving and Detention
TypeObject (single object)
Date of publishing2021-01-29
Edition number1
Height (inches)82
Width (inches)36
Depth (inches)24

Links

Product urlhttps://fetchbim.com/product/90
Technical descriptionhttps://app.fetchbim.com/Family/3fb9b391-ae82-4556-92b6-0f13255c9e55/File/PDF-SpecManual

Material mainStainless steel
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryFurniture - Shelving & Storage
IFC classificationFurniture
CSI MasterFormat 2014 Code10 51 13
CSI MasterFormat 2014 TitleMetal Lockers
OmniClass Number23-29 15 15 11
OmniClass TitleMetal Lockers
CSI UniFormat II CodeE20
CSI UniFormat II TitleFURNISHINGS

Region availability

North America
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States