BIM objects - Free download! Securus S2

Securus S2

358 Rigid Mesh Security Fencing System to LPS 1175 B3 (SR2) Issue 8

CLD Securus S2 offers reduced installation time compared to Securus AC SR2, thanks to its off-site assembly of fencing cassettes, requiring a minimum of two persons for installation. Comprising two layers of rigid mesh cassettes fastened together with a full-length clamp bar, Securus S2 provides sites with high levels of security.

Tested and certified to LPS 1175 Issue 8 B3 (SR2), Securus S2 is designed to withstand threats and attacks from a range of tools, ensuring robust protection.

Features:

Specialist high-security system designed to withstand a minimum 3-minute delay
Constructed with recycled materials, promoting sustainability
Offers active anti-intruder options for enhanced security measures
Base plate and ground bury options available for flexible installation
Panels can be swapped out as security threats change, ensuring adaptability

Specification

Standard: LPS 1175 B3 (SR2) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Secured by Design - Police Preferred Specification
Product Reference: CLD Securus S2 358 Rigid Mesh Panel System
Panel type: Mesh and wire. Double layered mesh cassette system. High aluminium content galvanised and powder coated to minimum 80 microns dft.
(Note: Fence Cassettes are supplied assembled for ease of install, mechanical lifting required – can be supplied unassembled)
Panel width: 2520mm
Wire diameter: 4mm
Mesh size: 76.2 x 12.5mm
Height:
Select as required. 2440mm to 5000mm
Nominal height: 2.4m to 5.0m
Finish: Polyester powder-coated to minimum 80 microns.
Any RAL colour including marine grade and metallics.
Top edge projection: nil
Panel installation: Bottom of panel minimum 300mm below ground. Base plated and no
ground bury options also available.
Security topping
options: Barbed and razor wire, cranked and straight
Posts: Special flanged post, galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: 80mm x 60mm
Maximum post
Centres: 2533mm +/-15mm
Fixings: 120mm x 6mm full length clamp bar. M8 Stainless Steel cup square bolt (min 30mm)
Foundations: Set posts in holes minimum 450mm square x 950mm deep.
Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions and fence height.
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
To be read in conjunction with Preliminaries/General conditions