Flo-Motion Bi Part - Type B100

FLO-MOTION TYPE B100

BI-PARTING DOOR SYSTEM

• Description - Manual aluminium framed bi-parting internal glazed door system with doors and panels of equal dimensions. Doors to be severe duty standard including sliding door mechanism.
• Manufacturer - Axis Entrance Systems Ltd.
• Product Reference - Axis Flo-motion® Bi-parting Door System Type B100
• Doorset Specification - The aluminium doorset to be formed from non-thermal aluminium extruded box section and to include a self-supporting "goal post" frame consisting of two jambs (100mm x 47mm profiles) and a 125mm x 100m integral transom bar with reinforced fixing points.
• Sliding Door Panels – Each door to be prepared with a bottom channel to operate with a floor mounted nylon guide Doors fabricated from various profiles using 100mm x 47mm rails and 100mm x 47mm stiles.
• Fixed Panels – Fabricated from similar profiles as the doors and secured within the frame structure by two aluminium channels.
• Track System - The sliding doors to employ a "low friction" recirculating bearing system & track. A "damper" mechanism (not self or soft closing) to be installed and active when the doors are at the closed and fully open positions. The pelmet will conceal the track and have "hold open" lid for ease of maintenance.
• Material finish - Satin Anodised Aluminium (SAA)
• Seals - Neoprene seals to be fitted to the leading edge of the sliding doors, the rear stiles facing the fixed screen and on the transom bar.
• Handles - One pair of "back to back" nylon handles, 600mm in length, to be fitted to both sliding doors
• Manual Locking – Refer to door schedule
• Electric locking – Refer to door schedule
• Threshold – Refer to door schedule
• Architraves & Trims – Refer to door schedule
• Glazing – Refer to door schedule and manufacturer’s door parameters. Units to be secured using appropriate beads & gaskets.
• Manifestation – Refer to door schedule
• Blind Operation – Refer to door schedule
• Structural Support - The doorset will be fixed to suitable supports (e.g. masonry or structural steels). Assessment by clients Structural Engineer and installed by the Building Contractor. Refer to Manufacturer’s drawings for Type B100.
• Structural Opening Dimensions – Refer to door schedule and manufacturer’s door parameters
• Clear Opening Width – Refer to door schedule and manufacturer’s door parameters (Approximate distance between frame and leading edge of door when in the fully open position).
• Clear Opening Height - Refer to door schedule and manufacturer’s door parameters (Approximate distance between bottom of pelmet & FFL)
• Force Testing – The manual sliding doors should be easily operated by hand. The sliding doors to be digitally force tested 3 times (distance determined by door width). A certificate to be issued showing the mean average opening & closing force of 15N (+/-5N) with test data in graph format. Refer to door schedule and manufacturer’s door parameters.