HTT-B10EX-B-T - Wireless Tabletop Keypad w/infiNET EX®, black textured

Buttons

Keypad Buttons - (10) pushbuttons
Button Events - Programmable for Normal, Tap, Double-Tap, and Press and Hold
Engraving - Custom backlit engraved button caps available separately

Backlight
White LED backlight for button engraving; Software-adjustable intensity, auto-dimmable 

LED Indicators
Feedback - (10) White LEDs, one per button

Light Sensor
Photosensor for control of auto-dimming function

Movement Sensor
Vibration sensor wakes unit from sleep mode if operating on battery

Low Battery Warning
Beep sound indicates low battery condition

Wireless Communications
RF Transceiver - infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
Range (typical) - 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);[2] Subject to site-specific conditions and individual device capabilities
Gateway - Requires an infiNET EX gateway[1]

Connectors
Power - (1) 2.5 x 5.5 mm DC power connector; 12 Volt DC power input (power pack included)

Power Requirements
Battery - (2) AA alkaline batteries required, estimated 8 months usage under normal operation
Power Pack - 6 Watts (0.5 Amps) @ 12 Volts DC output, 100-240 Volts AC, 50/60 Hz line input, model PW-1205RU (included)

Environmental
Temperature - 32° to 104° F (0° to 40° C)
Humidity - 10% to 90% RH (non-condensing) 
Heat Dissipation - 3.4 BTU/Hour

Enclosure
Plastic, textured, brushed aluminum inlay

Dimensions
Height - 1.46 in (38 mm)
Width - 3.60 in (92 mm)
Depth - 4.69 in (120 mm)
Weight - 5.0 oz(143 g) without batteries; ~6.8 oz (~192 g) with batteries

1. Requires an infiNET EX gateway, model CEN-RFGW-EX, MC3, or DIN-AP3MEX. A single gateway supports up to 106 infiNET EX network devices. Additionally, up to 5 infiNET EX expanders (model CLW-EXPEX or GLA-EXPEX) may be added to the network for extended range. All gateways, expanders, and other infiNET EX devices are sold separately.
2. Crestron infiNET EX is a wireless mesh network, meaning each device on the network behaves as an expander, passing the signals it receives on to any other devices within range. This effectively extends the total range of the network, and reinforces it by providing multiple redundant signal paths. However, battery powered infiNET EX devices, including the HTT-B10EX, do not function as expanders.