CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.3 (6 reviews)

4.3(6 reviews)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Specifikation

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Teknisk specifikation

Unik ref.CD60GS
ProduktfamilieDampers for Air Ductwork
ProduktgruppeCommercial Control Dampers
TypeObjekt (enkelt objekt)
Udgivelsesdato2022-07-28
Udgavenummer1

Links

Produkt-URLhttps://www.ruskin.com/model/cd60gs-genset
Teknisk beskrivelsehttps://www.ruskin.com/doc/Id/9866
Licitationsoplysningerhttps://www.ruskin.com/doc/Id/10091

Relateret

Materiale primærtGalvaniseret stål
Designet iUSA
Fremstillet iUSA

Klassifikation

BIMobject-kategoriHVAC - Rørarbejde
IFC-klassifikationBefugter
UNSPSC-navnVentilation dampers
UNSPSC-kode40101504
Uniclass 2015-kodePr_65_65_24
Uniclass 2015-beskrivelseDuct dampers
CSI MasterFormat 2014-kode23 09 13.43
CSI MasterFormat 2014-titelControl Dampers
OmniClass-nummer23-33 29 00
OmniClass-betegnelseHVAC Dampers
CSI UniFormat II-kodeD3090
CSI UniFormat II-titelOther HVAC Systems & Equipment

Tilgængelighed i region

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Anguilla	Ækvatorial Guinea	Argentina	Amerikansk Samoa
Albanien	Armenien	Antigua og Barbuda	Algeriet	Bolivia	Australien
Andorra	Aserbajdsjan	Aruba	Angola	Brasilien	Cook-øerne
Belgien	Bahrain	Bahamas	Benin	Chile	Fiji
Bosnien-Herzegovina	Bangladesh	Barbados	Botswana	Colombia	Fransk Polynesien
Bulgarien	Bhutan	Belize	Burkina Faso	Ecuador	Guam
Cypern	Brunei Darussalam	Bermuda	Burundi	Falkland-øerne (Islas Malvinas)	Kiribati
Danmark	Cambodia	Canada	Cameroon	Fransk Guiana	Marshall-øerne
Estland	Cocosøerne	Caribbean Netherlands	Cape Verde	Guyana	Mikronesien
Færøerne	Det britiske territorium i Det Indiske Ocean	Caymanøerne	Chad	Paraguay	Nauru
Finland	Filippinerne	Costa Rica	Comoros	Peru	New Zealand
Frankrig	Forenede Arabiske Emirater	Cuba	Congo	Suriname	Niue
Gibraltar	Georgien	Curaçao	Den centralafrikanske republik	Uruguay	Nordmarianerne
Grækenland	Hong Kong	De britiske jomfruøer	Den demokratiske republik Congo	Venezuela	Norfolk
Guernsey	Indien	Dominica	Djibouti		Ny Kaledonien
Holland	Indonesien	Dominikanske Republik	Egypten		Palau
Hviderusland	Irak	El Salvador	Elfenbenskysten		Papua Ny Guinea
Irland	Iran	Grenada	Eritrea		Pitcairn-øerne
Island	Israel	Grønland	Eswatini		Samoa
Isle of Man	Japan	Guadeloupe	Etiopien		Solomon-øerne
Italien	Jordan	Guatemala	Gabon		Timor-Leste
Jan Mayen	Juleøerne	Haiti	Gambia		Tokelau
Jersey	Kazakhstan	Honduras	Ghana		Tonga
Kroatien	Kina	Jamaica	Guinea		Tuvalu
Letland	Kuwait	Jomfruøerne	Guinea-Bissau		United States Minor Outlying Islands
Liechtenstein	Kyrgyzstan	Martinique	Kenya		Vanuatu
Litauen	Laos	Mexico	Lesotho		Wallis og Futuna
Luxembourg	Libanon	Montserrat	Liberia
Malta	Macau	Nicaragua	Libyen
Moldova	Malaysia	Panama	Madagascar
Monaco	Maldiverne	Puerto Rico	Malawi
Montenegro	Mongoliet	Saint Kitts og Nevis	Mali
Nordmakedonien	Myanmar (Burma)	Saint Lucia	Marokko
Norge	Nepal	Saint Pierre og Miquelon	Mauritania
Østrig	Nordkorea	Saint Vincent og Grenadinerne	Mauritius
Polen	Oman	Saint-Barthélemy	Mayotte
Portugal	Pakistan	Saint-Martin	Mozambique
Rumænien	Palæstina	Sint Maarten	Namibia
Rusland	Qatar	Trinidad og Tobago	Niger
San Marino	Saudiarabien	Turks- og Caicosøerne	Nigeria
Schweiz	Singapore	USA	Reunion
Serbien	Sri Lanka		Rwanda
Slovakiet	Sydkorea		Sankt Helena
Slovenien	Syrien		São Tomé og Príncipe
Spanien	Taiwan		Senegal
Storbritannien	Tajikistan		Seychellerne
Sverige	Thailand		Sierra Leone
Tjekkiet	Turkmenistan		Somalia
Tyskland	Tyrkiet		Sudan
Ukraine	Uzbekistan		Sydafrika
Ungarn	Vietnam		Sydsudan
Vatikanstaten	Yemen		Tanzania
			Togo
			Tunesien
			Uganda
			Vestsahara
			Zambia
			Zimbabwe