Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Specifikation

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Teknisk specifikation

Unik ref.meyersound-ashby
ProduktfamilieLoudspeakers
ProduktgruppeULTRA
TypeObjekt (enkelt objekt)
Udgivelsesdato2020-03-12
Udgavenummer2

Links

Produkt-URLhttps://meyersound.com/product/ashby/
Monteringsvejledninghttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Produktcertificeringhttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Teknisk beskrivelsehttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Relateret

Materiale primærtAluminium
Designet iUSA
Fremstillet iUSA

Klassifikation

BIMobject-kategoriElektronik - Lyd
IFC-klassifikationObjekt
Uniclass 2015-kodePr_70_75_36_50
Uniclass 2015-beskrivelseLoudspeakers
CSI MasterFormat 2014-kode27 24 23
CSI MasterFormat 2014-titelAudio-Video Devices
OmniClass-nummer23-37 15 29 11 13
OmniClass-betegnelseLoudspeakers

Tilgængelighed i region

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Anguilla	Ækvatorial Guinea	Argentina	Amerikansk Samoa
Albanien	Armenien	Antigua og Barbuda	Algeriet	Bolivia	Australien
Andorra	Aserbajdsjan	Aruba	Angola	Brasilien	Cook-øerne
Belgien	Bahrain	Bahamas	Benin	Chile	Fiji
Bosnien-Herzegovina	Bangladesh	Barbados	Botswana	Colombia	Fransk Polynesien
Bulgarien	Bhutan	Belize	Burkina Faso	Ecuador	Guam
Cypern	Brunei Darussalam	Bermuda	Burundi	Falkland-øerne (Islas Malvinas)	Kiribati
Danmark	Cambodia	Canada	Cameroon	Fransk Guiana	Marshall-øerne
Estland	Cocosøerne	Caribbean Netherlands	Cape Verde	Guyana	Mikronesien
Færøerne	Det britiske territorium i Det Indiske Ocean	Caymanøerne	Chad	Paraguay	Nauru
Finland	Filippinerne	Costa Rica	Comoros	Peru	New Zealand
Frankrig	Forenede Arabiske Emirater	Cuba	Congo	Suriname	Niue
Gibraltar	Georgien	Curaçao	Den centralafrikanske republik	Uruguay	Nordmarianerne
Grækenland	Hong Kong	De britiske jomfruøer	Den demokratiske republik Congo	Venezuela	Norfolk
Guernsey	Indien	Dominica	Djibouti		Ny Kaledonien
Holland	Indonesien	Dominikanske Republik	Egypten		Palau
Hviderusland	Israel	El Salvador	Elfenbenskysten		Papua Ny Guinea
Irland	Japan	Grenada	Eritrea		Pitcairn-øerne
Island	Jordan	Grønland	Eswatini		Samoa
Isle of Man	Juleøerne	Guadeloupe	Etiopien		Solomon-øerne
Italien	Kazakhstan	Guatemala	Gabon		Timor-Leste
Jan Mayen	Kina	Haiti	Gambia		Tokelau
Jersey	Kuwait	Honduras	Ghana		Tonga
Kroatien	Kyrgyzstan	Jamaica	Guinea		Tuvalu
Letland	Laos	Jomfruøerne	Guinea-Bissau		United States Minor Outlying Islands
Liechtenstein	Libanon	Martinique	Kenya		Vanuatu
Litauen	Macau	Mexico	Lesotho		Wallis og Futuna
Luxembourg	Malaysia	Montserrat	Liberia
Malta	Maldiverne	Nicaragua	Libyen
Moldova	Mongoliet	Panama	Madagascar
Monaco	Myanmar (Burma)	Puerto Rico	Malawi
Montenegro	Nepal	Saint Kitts og Nevis	Mali
Nordmakedonien	Nordkorea	Saint Lucia	Marokko
Norge	Oman	Saint Pierre og Miquelon	Mauritania
Østrig	Pakistan	Saint Vincent og Grenadinerne	Mauritius
Polen	Palæstina	Saint-Barthélemy	Mayotte
Portugal	Qatar	Saint-Martin	Mozambique
Rumænien	Saudiarabien	Sint Maarten	Namibia
Rusland	Singapore	Trinidad og Tobago	Niger
San Marino	Sri Lanka	Turks- og Caicosøerne	Nigeria
Schweiz	Sydkorea	USA	Reunion
Serbien	Syrien		Rwanda
Slovakiet	Taiwan		Sankt Helena
Slovenien	Tajikistan		São Tomé og Príncipe
Spanien	Thailand		Senegal
Storbritannien	Turkmenistan		Seychellerne
Sverige	Tyrkiet		Sierra Leone
Tjekkiet	Uzbekistan		Somalia
Tyskland	Vietnam		Sudan
Ukraine	Yemen		Sydafrika
Ungarn			Sydsudan
Vatikanstaten			Tanzania
			Togo
			Tunesien
			Uganda
			Vestsahara
			Zambia
			Zimbabwe