Neotherm LC

Neotherm LC

The NeoTherm LC is a direct vent, sealed combustion, condensing and modulating hydronic boiler. These compact 1.0 million and 1.2 million BTU/h workhorses are powered by a dual fired ASME stainless steel water tube heat exchanger resulting in 10:1 turndown and thermal efficiencies as high as 99%. Setup, operation and diagnostics are made easy with the NeoTherm LC’s large color touch screen display. The advanced NeoTherm LC control system includes a cascading feature that allows for up to four boilers to be lead lagged with onboard controls. Up to eight NeoTherm LC boilers can be lead lagged when coupled with M4 and M4EXT controllers. This results in a modulating heating cell of up to 9.6 million BTU/hr with a combined 80:1 turndown. Autodesk® Seek hosted BIM object, Published by Courtesy BIMobject®
Specifikation
  • • Full fire thermal efficiencies as high as 95% • 10% to 100% modulation (10:1 turndown) • Low 10ppm NOx • Sealed combustion • Pre-mix stainless steel burner • Horizontal or vertical direct vent • Built in condensate trap • Indirect water heater priority • Large color touch screen display • Compact footprint • Direct spark ignition system • Stainless steel, heat exchanger with welded construction (no gaskets) • 160 psi maximum working pressure • Boiler: 75 psi (517kPa) ASME rated pressure relief valve • Volume Water Heater: 125 psi (861 kPa) ASME rated pressure relief valve • Water Flow Switch • Temperature and Pressure gauge • Drain Valve • Multiple pump control for boiler pump, system pump and indirect domestic water pump, each with delay • Cascading PID modulating feature for up to 4 boilers to be lead lagged, 8 with M4 controller • Alarm output • Outdoor reset • PVC, CPVC, Polypropylene or Stainless steel venting • Direct vent up to 100ft, Vertical or Horizontal • Outdoor air temperature sensor • On/off toggle switch • Manual reset high limit • Burner site glass • All piping and wiring from the back of the boiler • Modbus Communications • Indoor/Outdoor installations • ASME H-Stamp Warranty: • 10 year limited Boiler warranty • 5 year limited Volume Water Heater warranty
Teknisk specifikation
  • Unik ref.NeothermLC
  • ProduktfamilieWater Heaters
  • ProduktgruppeCondensing Hydronic Boilers
  • TypeObjekt (enkelt objekt)
  • Udgivelsesdato2014-04-01
  • Udgavenummer1
Relateret
  • Materiale primærtRustfrit stål
  • Materiale sekundærtRustfrit stål
  • Designet iUSA
  • Fremstillet iUSA
Klassifikation
  • BIMobject-kategoriHVAC - Vandvarmere
  • IFC-klassifikationVarmeveksler
  • CSI MasterFormat 2014-kode23 52 16
  • CSI MasterFormat 2014-titelCondensing Boilers

Tilgængelighed i region

Nordamerika
USA