OPERA 220
Ferroli

OPERA 220

High power condensing thermal module with large water content, designed for single or bank installations, in combination with a complete range of hydro, gas and flue gas accessories, up to 960 kW Hydraulic, gas and flue gas accessories for bank installation, INAIL certificate, with 2 and 3 modules Flue gas tube heat exchanger, made with AISI 316 Ti stainless steel, with vertical configuration, helical cross-section, set up perpendicularly to the flue gas chamber Full pre-mixing combustion unit with metal fibre front combustion burner with very low emissions (CLASS 6 according to EN 15502-1). The modules can run on Methane and LPG
Specifikation
  • It reaches one of the highest seasonal space heating efficiencies in its category: ηs 94% A+ SYSTEM: combined with the modulating remote control and the external probe (optional) it reaches the top efficiency class A+ (scale from G to A+++) The large volume of water of the generator allows the boiler to be connected to the system without the need for separating devices and allows for a very high design ∆t Management of the modules in bank set-up with self-configuring MASTER / SLAVE system Setting of switching on and off of generators (which can be switched on and off in sequence or work simultaneously in parallel) through the control panel of the MASTER generator Electronics on board the machine to manage a system with two direct zones and one DHW storage or systems with differentiated temperatures (direct and mixed) in combination with the FZ4 B temperature control unit RANGE RATED certified generator to adjust the generated power to the system’s needs by increasing the efficiency of the system and preserving the mechanics of the machine The modules can be controlled and conducted remotely: Regulation of power or temperature with 0 - 10V signal / Signalling of block alarm for safety and restoration of operation / OPENTHERM (OT) and MODBUS parameterisable communication protocols
Teknisk specifikation
  • Unik ref.Opera-220
  • ProduktfamilieHVAC - Boilers
  • ProduktgruppeBoilers
  • TypeObjekt (enkelt objekt)
  • Udgivelsesdato2019-10-14
  • Udgavenummer1
Relateret
  • Materiale primærtMetal
  • Materiale sekundærtPlast
  • Designet iItalien
  • Fremstillet iItalien
Klassifikation
  • BIMobject-kategoriHVAC - Varmtvandsbeholdere
  • IFC-klassifikationKedel
  • UNSPSC-navnBoilers
  • UNSPSC-kode401020
  • Uniclass 2015-kodePr_60_60_08
  • Uniclass 2015-beskrivelseBoilers
  • CSI MasterFormat 2014-kode23 52 00
  • CSI MasterFormat 2014-titelHeating Boilers
  • OmniClass-nummer23-33 11 13
  • OmniClass-betegnelseCondensing Boilers
  • CSI UniFormat II-kodeD3020
  • CSI UniFormat II-titelHeat Generating Systems

Tilgængelighed i region

Europa
Åland
Albanien
Andorra
Belgien
Bosnien-Herzegovina
Bulgarien
Cypern
Danmark
Estland
Færøerne
Finland
Frankrig
Gibraltar
Grækenland
Guernsey
Holland
Hviderusland
Irland
Island
Isle of Man
Italien
Jan Mayen
Jersey
Kroatien
Letland
Liechtenstein
Litauen
Luxembourg
Malta
Moldova
Monaco
Montenegro
Nordmakedonien
Norge
Østrig
Polen
Portugal
Rumænien
Rusland
San Marino
Schweiz
Serbien
Slovakiet
Slovenien
Spanien
Storbritannien
Sverige
Tjekkiet
Tyskland
Ukraine
Ungarn
Vatikanstaten